Re-Scan For Channels - Acer AT2621, AT2622 User Manual

Re-scan for channels

The first time you completed the setup wizard, all available channels were listed. If you need to re-scan for new channels, please
follow the steps below:
Scanning for channels
1
2
3
4
Press the MENU key on the remote control to bring up the OSD.
Use the directional keys to navigate and select
Select OK and press MENU to exit.
Channel Management.
Highlight Auto Scan. Then, select Start
and press OK to begin.
or
Highlight Manual Scan. Then, select Scan
up, Scan down or Scan for updates and
press OK to begin.
13