Hookup And Settings; Rear Panel; Connecting To The Aerial - NEC NDH-81 Owner's Manual

Hookup and Settings

Rear Panel

a
h i
a AERIAL
Connect the aerial to this terminal.
b AV OUT (VIDEO / AUDIO OUT (Left/Right))
Connect to a TV with video/audio inputs.
c AV IN 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
d COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
e OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
f Cooling fan
g AC Power Cord
Plug into the power source.
h RF. OUT
Passes the signal from the AERIAL to your
TV/monitor

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
10
b c d e
j
i S-VIDEO OUT
j COMPONENT/PROGRESSIVE SCAN VIDEO
f
Connect to a S-Video Input on TV.
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
Aerial
ANTENNA
INPUT
R
g
Rear of TV
VIDEO
AUDIO INPUT
INPUT
L R
Rear of the recorder