Download Print this page
   

Advertisement

Quick Set‐up Guide 
The SCC‐3100A Quick set‐up guide describes how to connect to both an SPD speed dome 
and SVR digital recorder for both basic and multiple operations. 
The equipment used in this example includes: 
 SCC‐3100A(FW2.5.2) & Junction box 
 SVR‐1680(FW1.2.2) 
 SPD‐3750(Ver 1.08) 
 Baud rate 9600 
 
SCC‐3100A Quick Set‐up Guide 1 May 2009 
SCC‐3100A  
 
 
 
 

Advertisement

   Also See for Samsung SCC-3100A

   Related Manuals for Samsung SCC-3100A

No related manuals

   Summary of Contents for Samsung SCC-3100A

  • Page 1

      SCC‐3100A   Quick Set‐up Guide      The SCC‐3100A Quick set‐up guide describes how to connect to both an SPD speed dome  and SVR digital recorder for both basic and multiple operations.  The equipment used in this example includes:   SCC‐3100A(FW2.5.2) & Junction box   SVR‐1680(FW1.2.2)   SPD‐3750(Ver 1.08)   Baud rate 9600      SCC‐3100A Quick Set‐up Guide 1 May 2009 ...

  • Page 2

    Baud Rate Settings   RS-485/422 Settings   SW2(default)   Response Mode Settings Samsung Techwin Protocol (set DIP 1,2,3,4, as OFF) Baud Rate : 9600 (set DIP 5,6 as   Backup Mode Settings 1 OFF) RS-485 (DIP 7 as OFF)      ...

  • Page 3

    Communication →   Remote Keyboard ID : 1   Remote (Device)SCC-3100 Communication→   Remote →Serial (Interface)RS 485   → COM2   (Baudrate)9600 (Device)Samsung SPD-     (Interface)RS 485 Communication→ (Baudrate)9600 SVR-1680  Remote →Serial →     COM4     Communication→...

  • Page 4

      2. Multiple Operation  a. Hardware Connections                                                    SCC‐3100A Quick Set‐up Guide 1 May 2009 ...

  • Page 5

            MODEL  GO TO  MENU SET PICTURE     PTZ 1 PTZ → CH 1 Menu → >> → camera ID → 1 Communication→ Remote PTZ N PTZ → CH N Menu → >> → camera ID → N SVR-1680 ...

  • Page 6

        Controller Operation  * If you operate more than 2 cameras, you have to select the camera (PTZ) through   controller (SCC-3100) after selecting DVR.   MODEL  MENU SET (In controller) PICTURE  DVR       Selection DVR 1 : DVR → 1 → enter  DVR 2 : DVR →...

Comments to this Manuals

Symbols: 0
Latest comments: