Technical Specifications - Alto TMX200DFX Quick Start Manual

TECHNICAL SPECIFICATIONS

MONO INPUT CHANNELS:
Microphone inputs (electronically balanced, discrete input configuration)
Frequency response:
THD+N:
Gain range:
SNR:
Line inputs (electronically balanced)
Frequency response:
THD+N:
Sensitivity range:
STEREO INPUT CHANNELS:
Line inputs (unbalanced)
Frequency response:
THD+N:
IMPEDANCES:
Microphone inputs:
Channel insert return:
All other inputs:
2-Track outputs:
All other outputs:
EQUALIZATION:
Mono: High-shelving:
Mid-peak/dip:
Low-shelving:
Stereo: Hi-shelving:
Mid-peak/dip:
Mid-low-peak/dip: ±15 dB @ 500 Hz
Low-shelving:
Low-cut filter:
DSP SECTION:
A/D & D/A converters/DSP Resolution: 24-bit
Effects:
Presets:
Controls:
MAIN MIX:
Noise (bus noise):
Max output:
Aux sends, max out:
ST SUB OUT:
POWER SUPPLY:
Main voltage:
Power consumption:
Fuse:
Main connection:
Inrush current at initial switch-on: 17.71 A
Inrush current after power supply interruption: 20.46 A
DIMENSIONS (W x D x H):
WEIGHT:
* Specifications are subject to change without notice.
10 Hz – 55 kHz, ±3 dB
0.005% at + 4 dBu, 1 kHz
0 dB to 45 dB (MIC)
115 dB
10 Hz – 55 kHz, ±3 dB
0.005% at + 4 dBu, 1 kHz
-15 to 30 dBu
10 Hz – 55 kHz, ±3 dB
0.005% at +4 dBu, 1 kHz
1.4 kΩ
2.5 kΩ
> 10 kΩ
1 kΩ
120 Ω
±15 dB @ 12 kHz
±15 dB (frequency range 100 Hz ~ 8 kHz)
±15 dB @ 80 Hz
±15 dB @ 12 kHz
±15 dB @ 3 kHz
±15 dB @ 80 Hz
75 Hz, 18 dB/Oct.
Reverbs: Hall, Room, Vocal, Plate
Delays: Mono, Stereo (max delay time: 650 ms)
Modulations: Chorus, Flanger, Reverb
Combinations: Reverb + Delay, Reverb + Chorus, Reverb + Flanger
256
16-position preset selector, 16-position variation selector, DSP mute switch,
peak LED indicator
Fader 0 dB, all input channels assigned & set to unity gain: -100 dBr (ref: +4 dBu)
+22 dBu balanced
+22 dBu
+22 dBu
100 VAC ~ 60 Hz, 120 VAC ~ 60 Hz, 230 VAC ~ 50 Hz, 240 VAC ~ 50 Hz
C-D Stereo Mode: 2 x 500 W @ 4 Ω (EIAJ), 2 x 340 W @ 4 Ω (RMS)
C-D Bridge Mode: 1000 W @ 8 Ω (EIAJ)
A-B Stereo Mode: 2 x 750 W @ 4 Ω (EIAJ), 2 x 520 W @ 4 Ω (RMS)
A-B Bridge Mode: 1500 W x 8 Ω (EIAJ)
115 V : 12 A; 230 V : 6.3 A
Standard IEC receptacle
29" x 15.7" x 4.5" (710 mm x 565 mm x 145 mm)
35.9 lbs (16.3 kg)
www.altoprofessional.com
MANUAL VERSION 1.1
44