Radio Shack TRS-80 Service Manual page 51

All and more about Sharp PC-1500 at http://www.PC-1500.info
R~embly
Sequence
4
5
6
Part Symbol
3.2
REl.5
7 -1
4-2
4-3
Parts to be Reassembled
Y Idle Gear
Type E Stopper Ring
Motor Cover
Ejection Lev., Shafi Unit
Ejection Lever
RE2 Type E Stopper Ring
Do not sale this PDF !!!
-49-
Precautions for Reassembly
lnsort the Y idle gear after moving the paper feed gear
by one tooth.
Reeommended to engage ofter marking the tooth
lip and moving the gear by one tooth.
Hang the motor cover by its square hole on the hook
on the po per guide B on the rear of the fr.imc unit.
ln.sert the ejection lever shaft unit into the frame
through a bearing hole and press in the coupling
lever fro1n outside the frarne.