Monster iCarPlay Cassette 800 Manual page 4

3. Close iCarPlay's arm to its original position.
4. Turn your car audio system on and set the volume to low.
5. Insert the iCarPlay cassette into your car's tape player, being sure the cable
exits the player door from the edge of the cassette unit that will be facing
out of your cassette player.
6. Insert the 1/8 inch audio plug into your iPod, iPhone, or other portable
music player's headphone jack.
Press PLAY on your car's cassette player if it did not start playing
automatically when the cassette was inserted.
7. Turn your music player on, select the song/playlist and press PLAY.
8. Increase the volume slightly on your car stereo and adjust the volume on
your portable player.
IMPORtANt: For the best audio performance, volume levels on your player and your car's audio system
should be roughly the same. Disproportionate volume levels can cause audio distortion and buzz.
Troubleshooting
Some car stereo tape players with auto-reverse will automatically switch
playback direction when the iCarPlay is inserted. If no sound plays, simply push
the auto reverse button on your car stereo, and playback should begin.