Tanita HD-333 Operating Instructions Manual page 3

Features
• Digital accuracy and reliability.
• Classic simplicity fits any décor.
• Durable construction, non-skid surface.
• "L" message appears when battery needs replacing.
Before Use
Select your preferred weight mode using the Weight Mode Switch
Placing Scale
The scale should be used on a hard even surface for accurate weighing.
Not recommended for use on carpeted surfaces. Placing scale on a very soft,
deep pile rug may affect weighing accuracy.
Instructions for Use
Gently tap the center of the
scale with your foot. When
"0.0" shows on the display,
step on the scale (Fig. 1).
The display shows your
body weight (Fig. 2).
Step off the scale.
The weight remains about 5 seconds. The unit then turns off.
Note: "Err" will appear on the display when the scale's weight capacity
is exceeded.
Calibration
To recalibrate the scale, gently tap
the center of the scale with your foot.
Do not place your hand on the scale
while calibrating (see Fig. 2); if you do,
"-0.2" or "-0.4" may be displayed.
Care and Maintenance
• Place the scale in an area free from heating equipment, high humidity,
or extreme temperature changes.
• Never submerge the scale in water or spill chemical liquids on it. To clean,
use a dampened cloth and mild detergent.
• Avoid excessive impact or vibration to the unit.
After Sales Service
Please contact the Tanita office nearest you regarding operation or trouble,
request for repair, and/or placement of an order for parts for products.
FIG. 1
0.0
TAP
HERE
FIG. 1
FIG. 2
FIG. 2
FIG. 3
0.0