AbleNet Mini Beamer Quick Start Manual

Quick Start Guide
Mini Beamer™
Transmitter & Receiver
www.ablenetinc.com
1-800-322-0956
PN 98000021 (07/13 Rev. A)
Mini Beamer Receiver
Mode
Button
Power
Button
Device
Reset
Toy/Appliance
Jack
Mini Beamer Transmitter
Activation
Surface
Power
Button
Device
Reset
Mini Beamer Receiver Operation
Activate power button for 5-seconds to turn wireless receiver on or off.
Mini Beamer Receiver must be paired to an AbleNet wireless transmitter
and the plug-to-plug adapter must be attached to the device you are
trying to operate with a switch. One receiver can be paired with up to
eight wireless transmitters to allow multiple people to participate at the
same time.
To enter pairing mode, hold the mode button down 5-seconds. Activate
each wireless transmitter to pair it with the wireless receiver. Activate the
mode button to exit pairing mode.
Select desired mode of operation by activating the mode button.
• Direct: Device is activated when wireless transmitter is activated.
• Seconds: Device is activated for 1 to 60 seconds after a wireless
transmitter is activated. Activate the power button to change the
Battery
seconds.
Charging
• Minutes: Device is activated for 1 to 99 minutes after a wireless
Port
transmitter is activated. Activate the power button to change the
minutes.
• Latch: Device is activated and remains on when wireless transmitter
is activated. Activate the wireless transmitter a second time to turn
off.
To charge, select the appropriate wall adapter for your region. Insert
micro USB portion of wall charger into battery charging port on Mini
Beamer Receiver and plug wall adapter into wall outlet. While charging a
plug symbol will flash next to the battery indicator on the wireless receiver.
When fully charged the plug symbol will remain lit.
Mini Beamer Transmitter Operation
Activate power button for 5-seconds to turn wireless transmitter on or off.
Mini Beamer Transmitter must be paired to an AbleNet wireless receiver
Indicator
to operate. One transmitter can be paired with multiple wireless receivers
Light
to activate multiple items at the same time.
To activate, place a finger or other portion of body within 10mm of the
activation surface or touch the activation surface. Indicator light will
blink and an auditory beep will play upon activation. The indicator light
will blink and auditory beep will play a second time upon release of the
activation.
To charge, select the appropriate wall adapter for your region. Insert
micro USB portion of wall charger into battery charging port on Mini
Beamer Transmitter and plug wall adapter into wall outlet. While charging
the indicator light will blink on and off. When fully charged the indicator
Battery
light will remain lit.
Charging
Port
Switch Input
Jack
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
Additional Information
Visit www.ablenetinc.com for mounting options. Mini Beamer Transmitters
and Receivers have an effective range of up to 30 feet.
AbleNet manufactured products include a two-year limited warranty. This
warranty is against defects in materials and manufacturing for two-years
from the date of purchase. Warranty in full text, along with return/repair
information is available at www.ablenetinc.com.
For more information on AbleNet products and services, contact:
AbleNet, Inc. 2625 Patton Road, Roseville, MN 55113
1-800-322-0956
www.ablenetinc.com
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Consult AbleNet Technical Support or your local Distributor for help.