Panasonic PV-D4745S-K Operating Instructions Manual page 27

*Important: If a remote control button does not work when pressed,
Audio Mode for Recording
1
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
(Display disappears after 5 seconds.)
2 Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
• Refer to "Receivable Broadcast Types"
• Arrow indicates selection.
3
Make a recording.
See p. 21.
Audio Mode for Playback
1 Start playback.
See p. 20.
2
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
3
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
• Select "HIFI (L/R)" or "HIFI (L)" or
• Arrow indicates
• Display disappears after 5 seconds.
selection.
Notes
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to a stereo
TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
D4745S-K(E) P26-35 (050120).p65
press the VCR button on the remote and try the button again.
on p. 26.
"HIFI (R)" to listen to stereo recordings
in stereo sound.
Select "NORMAL" for monaural sound.
27 2005/01/20, 14:02
27