Unpacking And Installation; For Your Safety - Gear4 AlarmDock Reveal User Manual

■ To find out how long is left on the timer, press
the SLEEP button at any time.
■ To turn off the sleep timer, press the SLEEP
button and use the
select OFF.
To download some of the finest
new music around for FREE, visit:
www.gear4.com/newmusic
Please ensure that your iPod / iPhone is
using the latest software version. To update
the software, connect your iPod / iPhone to
iTunes. If there is a newer software version
available you will be prompted to upgrade.
Copyright © 2010 Disruptive Limited. All rights
reserved. Reproduction in part or in whole is
prohibited. GEAR4 and AlarmDock are trade
marks of Disruptive Limited. iPhone, iPod,
iPod nano, iPod classic and iPod touch are
trade marks of Apple Inc., registered in the
U.S. and other countries.
"Made for iPod" and "Made for iPhone" mean
that an electronic accessory has been designed
to connect specifically to iPod or iPhone
respecitively and has been certified by the
developer to meet Apple performance standards.
3 GEAR4 | AlarmDock Reveal | User Manual
and buttons to
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
WARNING
To reduce the risk of fire or electric shock,
do not expose this unit to rain or moisture.
CAUTION
Use of controls or adjustments of performance
or procedures other than those specified may
result in hazardous radiation exposure.

UNPACKING AND INSTALLATION

Unpack your unit carefully. We recommend
that you save the packaging in case you ever
need to store your unit. To avoid damage, never
place the unit or its batteries near radiators, in
front of heating vents, under direct sunlight or
near water.

FOR YOUR SAFETY

‒ When disconnecting the power supply, pull
the plug first. Do not pull the cord by itself.
‒ Never handle the power plug with wet hands,
as this could cause fire or electric shock.
‒ Refer servicing to qualified personnel only.
‒ Do not open the housing.
‒ Do not twist or pinch the power supply cord.
If the plug or power supply cord needs to be
replaced, ensure that it complies with the
manufacturer's recommendation.