Deleting All Cables - NEC NDA-31135 User Manual

4-4 Managing Cables
NOTE
Table 4-1
Field
Extension
LEN
Campus
Circuit
Closet
Building
Floor
Room
Jack
Pair
Pair Status
DID
Comments

Deleting all Cables

Only the administrator can use the Delete All functionality.
In the cable's main window, select a cable and then click
Step 1
the action toolbar.
In the Delete Confirmation dialog box, select
Step 2
Cable Fields
The extension currently active through the cable. Select an
extension from the drop-down list of all extensions. This field is
*0
used to integrate the Cable Management Module with Devices
and Work Orders.
*0 Identification of the Local Exchange Node.
At least one of the field's Extension, LEN, or Pair must be
Note:
defined.
0 The campus where this cable is installed.
0 The circuit for this cable.
0 The cable's closet.
0 Describing the physical location of the cable socket.
0 Describing the physical location of the cable socket.
0 Describing the physical location of the cable socket.
0 Identification of the cable's jack.
Identification of the pair connected to the cable. Pair ID must be
*0
unique.
0 Select from the drop-down list: Available, Used, N/A, or Other.
0 The external dialing number to the extension.
M Any free text.
Expense Management Cable Managment Module User Guide - Revision 1
Description
in
.