1.3.3 "Headset" Button............6 1.3.4 "Plus/Minus" Button ............ 6 1.3.5 "Mute" Button ............. 7 1.3.6 Using the Buttons on the SwyxIt! Handset P280 When Other Devices Are Connected (e.g., a SwyxIt! Speakerphone P150) ......7 Assigning an Audio Mode to the SwyxIt! Handset P280 ............
In addition to the handset, the SwyxIt! Handset P280 features: A speaker for open listening To be able to use the SwyxIt! Handset P280, you must have SwyxWare A headset connection (RJ11 connector) 2011 R2 and SwyxIt! 2011 R2 MP2 or higher.
SwyxIt! Handset P280 SwyxIt! Handset P280 Functions in Detail Press the Situation Result following button: The information below describes the behavior of the SwyxIt! Handset The handset is off the Speaker The device speaker on the P280 in detail. hook and you are in SwyxIt! Handset P280 is the middle of a call.
The handset is on the "Plus/Minus" The ringing volume is set on "Headset" button lights up. hook and the phone Button the SwyxIt! Handset P280. The resulting call takes rings. The changes are saved and place via the headset. applied within the audio Pressing the "Headset"...
Press the Situation Result following button: The buttons on the SwyxIt! Handset P280 are only ever used to control The handset is off the Mute The LED on the "Mute" the handset itself. They cannot be used to control other devices.
Handset P280 You can assign various audio modes to the SwyxIt! Handset P280. When you insert a SwyxIt! Handset P280 into the USB port of your PC, the handset is entered automatically for the "Handset", "Headset", and "Handsfree" modes. If no audio device has been entered for "Open listening"...
Page 9
SwyxIt! Handset P280 No microphone settings are available under the "Open listening" and "Ringing" options. To configure the volume of the sound or voice output for the audio mode, click on the "Play" button and move the slider until the required volume is set.
Need help?
Do you have a question about the p280 and is the answer not in the manual?
Questions and answers