Download Print this page

Using The Appliance - Philips QG3280 Instruction Manual

Hide thumbs Also See for QG3280:

Advertisement

EnGlish
Put the adapter in the wall socket (Fig. 5).

Put the appliance in the charger (Fig. 6).
4
The charging light starts to flash green to indicate that the appliance
,
is charging (Fig. 7).
When the battery is fully charged, the charging light lights up
,
green continuously.
After approx. 0 minutes, the charging light goes out to save energy.
,
Note: You can also charge the appliance by plugging the adapter directly in to
the appliance.

Using the appliance

Body trimming
You are advised to trim your body hair when it is dry because wet hair
tends to stick to the body.
Tip: Take your time when you first start to trim sensitive areas. You have to
acquire practice with the appliance. Your skin also needs some time to adjust to
the procedure.
Tip: When you trim sensitive areas, we advise you not to use the trimmer
without the trimming comb.
Attach the trimmer onto the handle ('click'). (Fig. 8)
1
Slide the body trimming comb into the guiding grooves on both sides
2
of the handle ('click') (Fig. 9).
To set the comb to the desired setting, press the setting selector (1)

and slide the comb to the desired hair length setting (2) (Fig. 10).
You can choose any setting between 3 and 11mm.
Switch on the appliance (Fig. 11).
4
To trim the hair, move the trimming comb through the hair
5
slowly (Fig. 12).
When you are finished, switch off the appliance. (Fig. 13)
6

Advertisement

loading