Related Manuals for ICON IP2032
Summary of Contents for ICON IP2032
-
Page 1: Quick Reference Guide
REV 1.0 IP2032 ICON Voice Networks 8001 Jetstar Drive Quick Reference Guide Irving, TX 75063 www.iconvn.com Printed in USA Part Number: 702406 ICON Voice Networks... -
Page 2: Phone Information
Phone Information Introduction Extension Number: The IP2032 includes a three-line LCD display, dial pad, three Passcode / Voice Mail Access Code: dynamic soft keys, handset, I/O ports, and a desktop pedestal IP Address: with a wall-mount option. The IP2032 supports... - Page 3 press the Edit soft key. Use the dial pad to enter a new number and press OK. Part Name Description For the placement of handset 4. To edit an existing number, find the number (0-9) you Handset Cradle (Top) want to edit and press the Edit soft key. Use the (receiver end).
- Page 4 Line keys 1 and 2 can be used for Ring Type line selection or programmable The IP2032 allows you to select one of eleven distinctive ring features. types for your phone. (Default = 0). Line Key In-Use = Red LED.
- Page 5 Conference Key Phonebook: The Phonebook feature allows you to store a list of phone Transfer a call to another station. numbers for fast dialing. The IP2032 can store up to 200 entries. Transfer Key Browse the Phonebook Press the Hold key to place a call on 1.
-
Page 6: Led Overview
Rapid Blink There is an incoming call. 3. To edit one of the ten entries, select Blocking List, then Rapid Blink IP2032 cannot register a number (0-9). Press OK, then Edit to enter a number. (Constant) to TOS3000 system. When finished press OK to save. Calls from this... - Page 7 IP2032 I/O Ports active. Transfer (Blind Transfer): The side view and the connectors of the IP2032 are as follows: 1. While on an active call press the Transfer key. 2. The system will prompt you to enter the number where you would like to transfer the call.
-
Page 8: Basic Call Features
(default 5 seconds). The 1. While on an active call press the Hold key. IP2032 will select the first available line to dial the 2. To pick-up the held call, press the Hold key or if the call number.
Need help?
Do you have a question about the IP2032 and is the answer not in the manual?
Questions and answers