First Use - AEG A81000TNW0 User Manual

8

First use

The set temperature will be reached within 24 hours.
Fluctuations of some degrees around set temperature are normal and does not mean any
fault in the appliance.
After a power failure the set temperature remains stored.
Red ALARM Indicator Light
Under normal operating conditions, the internal temperature of the freezer will ensure the
long-term conservation of the stored food.
When such temperature rises above a certain level (-12 °C), the appliance will trigger an
acoustic and light alarm. The light alarm is a blink red light (Red ALARM Indicator Light),
while the acoustic alarm is an intermittent sound.
You can stop the acoustic alarm by pressing the ALARM STOP Button.
When switching on the freezer for the first time, the Red ALARM Indicator Light will blink
until the internal temperature has reached a level required for the safe conservation of fro-
zen food.
Quick Freeze FROSTMATIC function
If more than 3-4 kg of food is to be frozen:
1. Press the SUPER Quick Freeze Button for 2-3 seconds to activate the FROSTMATIC func-
tion 6-24 hours before placing the fresh food in the freezer, the Yellow SUPER Indicator
Light will illuminate. The compressor will now run continuously, to ensure that the
fresh food is frozen as quickly as possible.
2. It is possible to deactivate the function at any time by pressing the SUPER Quick Freeze
Button.
3. Place the food in the freezing compartment or compartments (indicated with graphics)
and leave the FROSTMATIC function for a further 24 hours.
4. Then push the SUPER Quick Freeze Button again (the Yellow SUPER Indicator Light will
go out).
5. Move frozen food from the freezing compartments into the other compartments (stor-
ing compartments) to make room for another freezing.
If the SUPER Quick Freeze Button is accidentally left on, the freezer will not be damaged,
but energy will be wasted and it will be automatically switched off 52 hours later. The SU-
PER Indicator Light will also go out.
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.