Page 1
XAVi Technologies Corporation. XAVi Technologies Corporation provides this documentation without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
– Product Warranty………..…………………………………….………….. 71 Overview Warranty Repair…………………….…….……………………………… 72 Out-of-Warranty Repair…………….…….……………………………….72 X8222r is an ADSL series of customer premise devices, which – – supports multi-ADSL line coding methods. X8222r provides a FCC Part 15 Notice..………………………………………….………….. 73 10/100BaseT Ethernet interface on the DTE side. The broadband IC CS-03 Notice……………….…………………………….…………….
Compliant with G.dmt (G.992.1) Annex A, G.lite (G.992.2), ADSL2 ( G.992.3), ADSL2+ (G992.5), and T1.413 over POTS line X8222r ADSL device unit Full rate operation up to 8 Mbps downstream and up to 1Mbps upstream. G.lite operation up to 1.5 Mbps downstream and...
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 Appearance Rear Panel Front Panel Label Description Power jack; connect to a power adapter. ETHERNET RJ-45 ports; connect to a PC or LAN. RESET Reset the modem back to factory settings by holding down on this button.
2. Use a RJ-45 cable to connect one end to the Ethernet IP address “192.168.1.1” into the address bar. port of X8222r, and the other end to the LAN or a PC with an Ethernet adapter installed. 3. Plug the AC adapter into the AC power socket, and then connect the DC jack to the PWR inlet of X8222r.
10 seconds or by using the System the steps to upgrade the software of X8222r using a web-browser: Commands link in the Web interface. Software upgrade through a web-browser Username/Password: admin Step 1.
Example: X8222r: 192.168.1.1 Your PC: 192.168.1.x 3. Connect your PC to X8222r and make sure that the PING function is working properly. The default IP address of this device is 192.168.1.1 4. Launch the Web browser (IE or Netscape), and enter the default IP address 192.168.1.1 into the address bar to...
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 Connection Settings 1.1 RFC-1483 Bridge Select RFC-1483 Bridge from the Connection Type drop-down Click on the Connection Settings link menu. on the navigation bar. Click on the Create New Connection Service link.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 1.2 PPP over ATM (PPPoA) Encapsulation: Select LLC or VC Mux. Choose the QoS (Quality of Service) to be provided over the connection. The QoS can take one of three possible values: Select PPPoA from the Connection Type drop-down menu.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 1.3 PPP over Ethernet (PPPoE) Encapsulation: Select LLC or VC Mux. Choose the QoS (Quality of Service) to be provided over the connection. The QoS can take one of three possible values: Select PPPoE from the Connection Type drop-down menu.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 1.4 RFC-1483 Route Choose the QoS (Quality of Service) to be provided over the connection. The QoS can take one of three possible values: UBR, CBR, or VBR. If QoS is CBR (Constant Bit Rate), then it Select RFC-1483 Route from the Connection Type drop-down requires a PCR (Peak Cell Rate) value.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 1.5 MER Encapsulation: Select LLC or VC Mux. Choose the QoS (Quality of Service) to be provided over the connection. The QoS can take one of three possible values: Select MER from the Connection Type drop-down menu.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 1.6 DHCP Client over RFC-2684 Bridge Choose the QoS (Quality of Service) to be provided over the connection. The QoS can take one of three possible values: UBR, CBR, or VBR. If QoS is CBR (Constant Bit Rate), then it Select DHCP from the Connection Type drop-down menu.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 1.7 IP over ATM (IPoA) Choose the QoS (Quality of Service) to be provided over the connection. The QoS can take one of three possible values: UBR, CBR, or VBR. If QoS is CBR (Constant Bit Rate), then it Select IPoA from the Connection Type drop-down menu.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 Advanced Settings 2.2 Port Forwarding Click on the Advanced Settings link on Click on the Port Forwarding link in the navigation bar to view the navigation bar. the Port Forwarding table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 2.3 Advanced Security 2.4 Access Control Click on the Advanced Security link in the navigation bar to Click on the Access Control link in the navigation bar to view view the Advanced Security settings table. You can use these the Access Control table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 2.5 LAN Clients 2.6 Bridge Filters Click on the LAN Clients link in the navigation bar to view the Click on the Bridge Filters link in the navigation bar to view the LAN Clients table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 2.8 Static Routing 2.7 Multicast Click on the Static Routing link in the navigation bar, and then Click on the Multicast link in the navigation bar to view the click on the Create New IPv4 Route link to view the Create IPv4 Multicast Configuration table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 2.9 Dynamic Routing 3. System Settings Click on the Dynamic Routing link in the navigation bar to view Click on the System Settings link on the Dynamic Routing configuration table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 3.2 Management IP Lease Duration: Enter the amount of time that an IP address can be used by a client. Management Relay On: Click on this toggle button to enable the modem to...
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 3.3 Firewall/NAT Services 3.4 Modem Setup Click on the Firewall/NAT Services link on the navigation bar to Click on the Modem Setup link on the navigation bar to view the view the Firewall/NAT Service table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 4. Modem Status Click on the Modem Status link on the navigation bar. This section includes Overview, Network Statistics, Connection Status, DHCP Clients, Modem Statistics, Product Information, and System Log. Each section is described in detail below.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 4.2 Network Statistics Click on the Network Statistics link in the navigation bar to view the Network Statistics table. This table displays the various statistics of the different LAN interfaces.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 4.3 Connection Status 4.4 DHCP Clients Click on the Connection Status link in the navigation bar to view Click on the DHCP Clients link in the navigation bar to view the the Modem Connection Status table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 4.5 Modem Statistics 4.6 Product Information Click on the Modem Statistics link in the navigation bar to view Click on the Product Information link in the navigation bar to the Modem Statistics table.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 4.7 System Log 5. Maintenance Click on the System Log link in the navigation bar to view the Click on the Maintenance link on the System Log window. navigation bar.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 5.2 User Management 5.3 Update Gateway Click on the User Management link in the navigation bar to view Click on the Update Gateway link in the navigation bar to view the User Management interface.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 5.5 Modem Test 5.4 Ping Test Click on the Modem Test link in the navigation bar to view the Click on the Ping Test link in the navigation bar to view the ping Modem Test interface.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 5.6 UI Preferences 6. Help Click on the UI Preferences link in the navigation bar to view the Click on the Help link on the navigation UI Preferences page. bar to view the Help index.
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 7. Logout Help Index Click on the Logout link on the navigation bar to view the Logout dialog box. Log Out: Click on the Log Out button to end the current session.
Page 32
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 - 62 - - 63 -...
Page 33
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 - 64 - - 65 -...
Page 34
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 - 66 - - 67 -...
X8222r User’s Manual Version 1.0 – – A1. Hardware Specifications Local Interface • One 10/100BaseT Ethernet port, IEEE 802.3, RJ-45 connector WAN ADSL Line Interface • Complies with G.dmt (G.992.1) Annex A over POTS line • Complies with G.lite (G.992.2) and T1.413 compliance over POTS line •...
(24) hours of receipt of the product. During the fourth (4th) through twelfth XAVi Technologies warrants that the ADSL unit will be free from (12th) months of ownership, XAVi Technologies will repair or defects in material and workmanship for a period of twelve (12) replace a defective product covered under warranty within months from the date of shipment.
XAVi expressly approves the changes or Repairs to certified equipment should be coordinated by a modifications. representative designated by the supplier. Any repairs or...
X8222r User’s Manual Version 1.0 X8222r User’s Manual Version 1.0 C3. UL Safety Regulations Disconnect TNV circuit connector or before removing cover or Contact Information equivalent. Disconnect TNV circuit connector(s) before disconnecting power. Do not use this product near water for example, near a bathtub,...
Need help?
Do you have a question about the X8222r and is the answer not in the manual?
Questions and answers