Tips for saving energy
Install the appliance in a dry, well
■
ventilated room! The appliance should
not be installed in direct sunlight or
near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
Allow warm food and drinks to cool
■
down before placing in the appliance.
Open the appliance as briefly as
■
possible.
To avoid increased power consump-
■
tion, occasionally clean the back of
the appliance.
If available:
■
Fit wall spacers to obtain the indicated
energy rating of the appliance (see
Installation instructions). A reduced
wall gap will not restrict the function of
the appliance. The energy rating may
then increase slightly. The gap of
75 mm must not be exceeded.
The arrangement of the fittings does
■
not affect the energy rating of the
appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating
units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are
switching on/off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. Use the height-adjustable feet or
place packing underneath them.
The appliance is not free-standing
Please move the appliance away from
adjacent units or appliances.
Containers or storage areas wobble
or stick
Please check the removable parts and
re-insert them correctly if required.
Bottles or receptacles are touching
each other
Move the bottles or receptacles slightly
away from each other.
en
29