Demo Button - Invion GPS-5V1 Instruction Manual

The GPS On
disconnect from the GPS receiver. If you are working in Free Browse
Map mode, the navigation device automatically disconnects from the GPS
receiver.
Tap the GPS Settings button to display the following Connection fields:
Delete Lets you permanently remove a selected map.
Note: Most Bluetooth receivers use COM 6 or COM 8. Most serial
receivers use COM 1.
Baud Rate This field lets you specify the transmission rate of data.
Protocol This field displays the GPS protocol. The default value is NMEA.
Note: Most receivers use NMEA 4800.
Connect to This button lets you locate the GPS receiver by the values you
GPS have entered in the COM, Baud, and Protocol fields.

Demo Button

Tapping the Start Demo button displays a simulated route. Many of
the navigation features are disabled when the Demo is running. You
can end the Demo by tapping the Stop Demo button.
and GPS Off
41
buttons let you connect or