App Operation Illustration - leadsun pbox x3 User Manual

D5. Place the lamp onto the pole.
Match the hole on the lamp with the hole on the pole,
and insert the screw in.
Fasten the screw and secure the lamp on the pole (as
shown in the picture on the left).
D6. Fix the pole.
Pull the extendable pole out and then fasten the
tightener from top to bottom (as shown in the picture
on the left).
Caution: be careful when pulling extendable pole out
as well as pushing it back into place.
D7. Children are forbidden to play with the lamp post.
To prevent any accident caused by a loose tightener,
please place and fasten a safety screw underneath the
tightener on the bottom of the lamp pole.
Safety Screw
11
E. Angle Adjustment illustration:
E1. Solar panel angle adjustment: loosen two M6 screws on both sides of main body, and adjust it to
suitable position and lock screws.
E2. LED module angle adjustment: turn the LED module to suitable position with your finger. (Refer
to the below figure)
E2

2.5 APP Operation Illustration

To control PBOX X3 through mobile phone, you should install LIVESUN APP as per the below
steps.
A. Iphone: please search "LIVESUN" in "APP Store", and then clicks to install.
B. Andriod Phone: please log in www.leadsunglobal.com or related software platform, and then
download LIVESUN APP and install.
You can do the below through APP:
1. Register a member.
2. Control the light.
3. Inquire historical data.
4. Set working mode.
5. Real-time supervision.
6. Music playing (PX3BL only).
7. Micophone (PX3BL only).
For further details, please kindly check 'Use Guide' under 'other functions' in the APP.
E1
12
EN