Zanussi ZBB 6286 User Manual page 12

I
I
5
Attach the appliance to
the niche with 4 screws.
C
D
E
E
B
7
Attach the covers (C,
D) to the lugs and the
hinge holes.
Install the vent grille (B).
Attach the hinge covers (E)
to the hinge.
Ha Hb
Hc Hd
9
Disconnect the parts
(Ha), (Hb), (Hc) and (Hd).
12
Downloaded from Fridge-Manual.com Manuals
6
Remove the correct
part from the hinge cover
(E). Make sure to remove
the part DX, in the case of
right hinge, SX in opposite
case.
E
E
8
If the appliance must
connect laterally to the
kitchen furniture door:
1. Slacken the screws
in fixing brackets (E).
2. Move the brackets
(E).
3. Retighten the screws.
~50 mm
o
90
21 mm
o
90
~50 mm
21 mm
10
Install the part (Ha) on
the inner side of the kitch-
en furniture.
Ha
Hc
11
Push the part (Hc) on
the part (Ha).
8 mm
K
Ha
13
Remove the brackets
and mark a distance of 8
mm from the outer edge of
the door where the nail
must be fitted (K).
Hb
Hd
15
Press the part (Hd) on
the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
8 mm
Hb
Ha
12
Open the appliance
door and the kitchen furni-
ture door at an angle of
90°.
Insert the small square
(Hb) into guide (Ha).
Put together the appliance
door and the furniture
door and mark the holes.
Hb
14
Place the small square
on the guide again and fix
it with the screws sup-
plied.
Align the kitchen furniture
door and the appliance
door by adjusting the part
Hb.