Remote Control Unit; Networks - Bosch DVR1C1161 Installation Instructions Manual

DVR1C1161 | Installation Manual | Chapter 2

2.5 Remote control unit

The remote control unit is an accessory that makes it
easy to control the DVR from a distance. You can carry
out the main operations using the remote control unit.
The keypad functions for the DVR are as follows:
RECORD: Press to start recording.
STOP: Press to stop recording or playback.
PLAY: Press to start playback.
SEARCH: Increase the speed by 2x, 4x, 8x, 16x,
32x, 640x, 2x . . .
REWIND: In playback mode, press to reverse
playback (Search key increases reverse
speed).
STEP REW.: Press to stop playback. Press again to
step backward image by image.
STEP FORW.:Press to stop playback. Press again to
step forward image by image.
FORWARD: In reverse playback, press for forward
playback (Search key increases forward
speed).
Bosch Security Systems | 2004-6
0
BOSCH
DVR control keys

2.6 Networks

The network connection uses the 10BaseT standard.
Make sure that your network card supports this
standard.
If you connect the DVR directly to a PC, use a cross-
over CAT5 network cable. If you connect the DVR to a
router or hub, use a straight-through CAT5 cable.
The following ports must be open for the remote
software to operate correctly:
• TCP port 80:Web Server
• TCP port 6666:Commands
• TCP ports 1111, 2222, 3333, 4444:Video data
If you are connecting via a firewall, check with your
network administrator to ensure that you can access the
unit.
EN | 12