Assemble Your Device - Samsung Galaxy S6 G920T User Manual

Assemble Your Device

This section helps you to
assemble your device.
Install the Nano SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card is loaded with your subscription
details, such as your Personal Identification Number
(PIN), available optional services, and other
features.
Warning: Please be careful when handling the
SIM card to avoid damaging it. Keep all SIM cards
out of reach of small children.
Caution: Exercise care when using the removal tool to
eject the internal SIM card tray.
1. Insert the removal tool into the hole on the
SIM card tray, and then push until the tray pops
out.
2. Place the nano SIM card on the tray.
•
Make sure that the card's gold contacts face
down into the device and that the card is
positioned as shown.
3. Slide the SIM card tray back into the slot.
Caution: If the SIM card is not inserted correctly, the
device cannot detect it. Reorient the SIM card and
place it back into the slot if it is not detected.
Getting Started
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A USB charger (charging head and
USB cable) is included with the device for charging
the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Note: It is recommended you fully charge the battery
before using your device for the first time.
Note: For fastest charging times, use the Samsung
Adaptive Fast Charger that came with your device.
This charger provides faster charging only when
connected to devices that support Adaptive
Fast Charging.
Caution: Use only charging devices and batteries
approved by Samsung. Samsung accessories are
designed for your device to maximize battery life.
Using other accessories may invalidate your warranty
and may cause damage.
1. Insert the USB cable into the USB charger/
Accessory port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
3. Unplug the charging head from the outlet and
remove the USB cable from the device when
charging is complete.
4
Assemble Your Device