Panasonic Section 770 User Manual page 27

Chapter 5. Tuning the Commands to Your Voice
SYSTEM
RESET TRAIN
WORD TO TRAIN ?
GO BACK
TRAIN GO BACK
NO YES
ADAPTING #1
GO BACK
576-10-770
5. Say "System."
Voice Guidance responds with "Reset or Train?"
6. Say "Train."
Voice Guidance responds with "Retrain which word?"
7. Say the command you want to train.
COMMANDS:
Cancel Call
Go Back Yes
Number Delete
Complete Add
Train Reset
Voice Guidance responds with '"
Note: You cannot use the following spoken commands: "Go Back,"
"Cancel," or "Repeat." Press the Soft Key [EXEC] or Cancel Key.
Example: To train "Complete"
Say "Complete."
'"Complete" Right?".
8. If the control command reiterated by Voice Guidance is correct,
say "Yes". If not, say "No".
• "Yes"
Voice Guidance responds with 'Say "
Õ
Example: "Yes" Voice Guidance responds with 'Say
"Complete"?'
• "No"
Voice Guidance speaks the next control command. After
speaking all the control commands, Voice Guidance says "No
other choices." Press the "Go Back" Soft Key [EXEC] to go
back to step 6 and repeat the process.
9. Again say the control command to be retrained.
Voice Guidance responds with "Say it again".
DBS 576 - Issued 3/23/98
Section 770 Voice Recognition Telephone
Program Change
No List
Name Back Space
System Delete All
Repeat
" Right?'
mm
Õ
Voice Guidance responds with
"?'
mm
27