A) SETTING THE TIME - Unscrew the crown and pull it out to the second position so that the second hand stops at the "0" position (refer to section D to reset "0" position). - Turn the crown to set the hour and minute hands. - Push the crown back to the normal position and screw down.
C) USING THE CHRONOGRAPH - The chronograph can be started and stopped each time button "A" is pressed. - Pressing button "B" resets the chronograph, and all hands return to the "0"position. D) CHRONOGRAPH RESET This procedure should be performed when the chronograph second hand does not return to the "0"...
WATCH SPECIFICATIONS Movement caliber: OS21 Diameter: 30.80 mm Height: 5.10 mm Battery: Silver oxide SR927W or equivalent Battery life: Approximately three years, assuming 60 minutes chronograph operation a day Chronograph: 1/100 second basis, up to 59 minutes, 59 seconds Water-resistance: 20 ATM, 200 m...