1. Manuals
  2. Brands
  3. StartVision Manuals
  4. IP Camera
  5. SV-IP206 Series
  6. User manual

StartVision SV-IP206 Series User Manual

Hd ip cam 1280 720
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD IP CAM 1280 720 Manual
1 Product Introduction
Thank you to use wired/wireless IP Camera solution. IPCAM
is a electronic equipment which is able to transmit dynamic video
stream to all over the world through the network. The user can
always monitor the place he wants from anywhere, as long as he
is able to connect to Internet.
ASW IP camera works based on the TCP/IP standard. A WEB
server is integrated inside which can support Internet Explorer.
And this feature can help you to accomplish online management
and maintenance on your device simply, such as remote
configuration, remote start-up and firmware upgrade.
You can use the IPCAM monitoring homes, offices, factories,
stores, nurseries and etc, simply, conveniently and real-time.
1.1 Hardware/Software requirements:
To use the computer-camera through networks, the minimum
hardware requirements of your computer should be met,
1. Pentium III CPU or better, 1GHz or higher frequency;
2. At least 256M memory;
3. windows xp, windows 7, 2000 or above operation system
Internet explorer version 4.0 or above, IE 6.0 is strongly
recommended.
1.2 Product features:
Ｓｉｍｐｌｅ　ｉｎｓｔａｌｌａｔｉｏｎ： It is very simple to install IP cameras. If
you choose wired networking solution, you only need to prepare
power and networks connection. If you want to use WIFI wireless
connection, only power is a must.
Ｓｃｏｐｅ　ｏｆ　ａｐｐｌｉｃａｔｉｏｎｓ： Apply to homes, offices, enterprises,
supermarkets, schools and other public places.
2
Installation and Operation Manual
1. Product Introduction
V2.0
V2.0
2
5
7
10
13
18
21
24
25
25
25
29
Installation and Operation Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SV-IP206 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for StartVision SV-IP206 Series

  • Page 1: Table Of Contents

    HD IP CAM 1280 720 Manual 1 Product Introduction Thank you to use wired/wireless IP Camera solution. IPCAM 1. Product Introduction is a electronic equipment which is able to transmit dynamic video stream to all over the world through the network. The user can 2.
  • Page 2 Ｓｕｐｐｏｒｔｉｎｇ　 ｍｕｌｔｉｐｌｅ　 ｐｒｏｔｏｃｏｌｓ： Embedded operation 1.3 Packing list: system supports the TCP / IP, SMTP (simple mail protocol), ● IP Camera SV-IP206 Series HTTP, UPNP, etc. ● WIFI Antenna(only supply for wireless camera) Ｓｉｍｐｌｅ　ｃｏｎｆｉｇｕｒａｔｉｏｎ：　Standard Web browser GUI can help ● CDROM(include user guide, control, search equipment) users to control and manage the IP cameras through LAN or ●...

  • Page 3: Installation

    2 Installation 2.1 Hardware installation ２．１．１　Ｉｎｓｔａｌｌ　ｎｅｔｗｏｒｋ　ｃｏｎｎｅｃｔｉｏｎ： Insert one crystal head of twisted pair cable into the cable slot of NIC(Network Interface Card), which locates on the back of IP camera. Then, connect the other crystal head of the cable to the router or switch.

  • Page 4: Search Equipment And Log Into The Network Camera

    ３．１．１　Ｓｅａｒｃｈ　Ｅｑｕｉｐｍｅｎｔ After software installation, please activate the search tools ｉｐｃａｍｔｏｏｌｓ．ｅｘｅ． When GUI comes up, please click "refresh" button. The program will search the network cameras, and displays the searched IP address, port number, equipment ID number ,device name, the machine's dynamic domain name, the wireless address and MAC address.

  • Page 5: Video Attribute Settings And Ptz(Pan/Tilt/Zoom) Control Operations

    4 Video attribute settings and “Login button” is one option to enter the user's computer， and “Mobile phone login” is another option for users who use the PTZ(Pan/Tilt/Zoom) control operations smartphone. By using ’’Mobile phone login”, user can watch the video of network cameras and operate a number of common features of the network camera.
  • Page 6 Ｆｕｌｌ　 ｓｃｒｅｅｎ：Monitor screen is full screen, in order to view Ｒｅｓｏｌｕｔｉｏｎ： the size of the currently selected video. easily. Currently supports two sizes: 1280x720 640x480 and 320x240. ＰＴＺ　 ｓｐｅｅｄ：　 User can control the PTZ speed according to Ｍｏｄｅ：　set the video light mode, and remove the jitter impact need of the image as per the electricity frequency.

  • Page 7: System Settings Options

    Ｆｕｎｃｔｉｏｎａｌ　ｄｅｓｃｒｉｐｔｉｏｎ　ｏｆ　ｔｈｅ　ｓｅｔ－ｕｐ　ｏｐｔｉｏｎｓ： Ｓｅｎｉｏｒ　ｏｐｅｒａｔｉｎｇ　ｉｎｓｔｒｕｃｔｉｏｎｓ： All connections:Used to connect with all of the increased IP ５．１　Ｌｉｖｅ　Ｖｉｄｅｏ For viewing video, in any case you can click on this button to camera. enter the video mode to watch. All disconnect: Used to disconnect with all of the increased IP camera.
  • Page 8 Select DHCP, device will automatically obtain the IP, which is not fixed (this feature requires the router to support DHCP protocol, and this feature should be activated). user want wireless feature, firstly, open , click on , search for your area wireless router; secondly, choose the router name ５．３．１．２　ｕｓｉｎｇ　ｔｈｅ　ｓｐｅｃｉｆｉｅｄ　ＩＰ　ａｄｄｒｅｓｓ　（ｓｔａｔｉｃ　ＩＰ）：　To specify of user itself and fill in the wireless router password and the type the equipment IP, it is required to manually fill in IP address.

  • Page 9: Alarm Settings

    5.3.4 Dynamic DNS different cameras, each camera needs a different port, such as 81,82, etc. and so on. 6 Alarm Settings device supports third-party's domain name resolution,dynamic DNS of Www.3322.org and www.dyndns.org. Also the equipment comes with a globally unique domain name. User can choose it himself.
  • Page 10 Ｓｅｒｖｅｒ：　Used to set the user's mail address. ＨＴＴＰ　 ａｌａｒｍ：　 Used to send messages to HTTP site when Ｐｏｒｔ：　Used to set the port of mail server ,usually it is default there is an alarm. values. Ｓｅｎｓｉｔｉｖｉｔｙ：　For motion detection sensitivity, the smaller the Ｓｅｎｄｅｒ：...

  • Page 11: Control Panel

    Ｕｓｅｒｓ： the name of the added user Ｐａｓｓｗｏｒｄ：　the added password of the user Ｐｅｒｍｉｓｓｉｏｎｓ：　 new users can be divided into administrators, operators and guests, administrators have highest authority. ７．６　Ｃｈａｎｇｅ　Ｐａｓｓｗｏｒｄ：　Used to change the login password. ７．７　 Ａｎｏｎｙｍｏｕｓ　 Ａｃｃｅｓｓ：　 In some occasions, if you hope 7 Control panel everyone can directly access ip cam ,you can specify a default identity anonymous users to login.

  • Page 12: Advanced Setting

    ７．１２　Ｄｏｗｎｌｏａｄ　Ｏｃｘ２：　Used for user to download and install Ocx2 control. ７．１３　 Ｌａｎｇｕａｇｅ： Used to select the appropriate language version. 8 Advanced Setting ８．１　ＰＴＺ　Ｓｅｔｔｉｎｇ：　used to set the rotation of PTZ, when user choose reverse rotation, the head will follow the arrows to the reverse detection, this feature is used to solve the camera when it is inversion.

  • Page 13: Diagnostic Tools

    9 Diagnose Tool For user’s convenience, IP camera supports DDNS feature. Each IP camera has a unique global domain name, which is Diagnostic Tools:Used to check the unusual situation of marked on device body. Also, user can obtain the domain name equipment, then help users to solve the network connection via IP Cam tools.
  • Page 14 1. Log in to the device page "forward rule">> "UPnP Settings", Ｉｆ　ｙｏｕ　ｕｓｅ　Ｄ－ＬＩＮＫ　ｒｏｕｔｅｒｓ，　ｐｌｅａｓｅ　ｒｅｆｅｒ　ｔｏ　ｔｈｉｓ　ｎｏｔｅ． ensure that the current UPnP state is "opened" as shown below ｉ）　Ｈｏｗ　ｔｏ　ｓｅｔ　ＵＰＮＰ　ｐｏｒｔ　ｍａｐｐｉｎｇ： １．　Ｐｕｓｈ　ｔｈｅ　ｂｕｔｔｏｎ　ｏｆ　ＷＰＳ　ｏｎ　Ｄ－Ｌｉｎｋ　ｒｏｕｔｅｒ　ｔｉｌｌ　ｔｈｅｒｅ　ｉｓ　 ｂｌｕｅ　ｌｉｇｈｔ　ｆｌａｓｈ ２．　Ｐｕｓｈ　ｔｈｅ　ｂｕｔｔｏｎ　ｏｆ　ＷＰＳ　ｏｎ　ＩＰ　Ｃａｍｅｒａ　ｔｉｌｌ　ｔｈｅｒｅ　ｉｓ　ｂｌｕｅ　 ｌｉｇｈｔ　ｆｌａｓｈ，　ｔｈｅｎ　ＩＰ　ｃａｍｅｒａ　ｃｏｎｎｅｃｔｓ　ｔｏ　ｔｈｅ　Ｄ－Ｌｉｎｋ　ｒｏｕｔｅｒ． 2. Log on to network camera, open the Device page "Network Settings">> "UPnP Settings", choose to "enable the UPnP feature"...

  • Page 15: How To Access Ip Camera Through Intelligent Mobile Phone

    intelligent mobile phone, iPhone or Android-OS(Operation 3. Settings finished System) based mobile phone. As follows below, we take iPhone Ｈｏｗ　ｔｏ　ｅｓｔａｂｌｉｓｈ　ｖｉｒｔｕａｌ　ｓｅｒｖｅｒ as example to show how to set IP Cam Viewer. 1. Open the router GUI page "forward rule">> "virtual server", 1.
  • Page 16 4. Add IP cameras. Click button to setup configurations. Click button to add device, Click button , you can find the menu below. Installation and Operation Manual V2.0 V2.0 Installation and Operation Manual...
  • Page 17 Please input parameters correctly following Click button OK and go back to main menu shown as follows, introduction below, Option Ｔｙｐｅ: choose as device type. Option ＩＰ: input the ＩＰ　Ａｄｄｒｅｓｓ　ＯＲ　Ｄｏｍａｉｎ　Ｎａｍｅ of the IP Camera. Option Ｐｏｒｔ: input the Port Number of the IP camera. Option Ｕｓｅｒ: input the User Name of the IP camera.
  • Page 18 You can control the rotation directions of the IP camera You can choose any IP camera displaying in the client through the direction button, upward, downward, left and right. software and run PTZ operations. Click the IP camera channel Except the four direction buttons, the rest buttons are reserved and the image will be displayed in full-screen scale.

Table of Contents