Adding A Hub; Relocating The Soundbar - Samsung HW-H750 User Manual

MULTIROOM LINk

ADDINg A HUB

An Soundbar and a HUB may not pair successfullly if the
Soundbar and HUB are too far apart or are on different floors.
In such cases, you can link two HUB's together by setting the
second HUB to Repeater mode. The additional HUB amplifies
the signal and lets you pair the Soundbar to the closest HUB.
1. Set the HUB that is connected to the wireless router to
Pairing mode by pressing its SPk ADD button for 1 second.
2. Plug in the new HUB you are using as an extender, and
then press its SPk ADD button for 10 seconds.
3. The newly added HUB's LED indicators turn off and on,
and it switches to Repeater mode.
4. Once the connection between the two HUB's has been
established, the added HUB's (
blinking.
● If your smart device is not connected to the wireless router with a Wi-Fi
connection, the Soundbar will not appear on the Samsung Multiroom app.
● Place the HUB that is in Repeater mode in an appropriate location between the
Soundbar and the HUB that is connected to the wireless router.
● You can set only one HUB to Repeater mode.
● HUB may not be commercially available depending on country or region.
To purchase, contact the distributor or Samsung Service Centre.

RELOCATINg THE SOUNDBAR

When relocating your Soundbar, refer to the below table.
Wireless router
HUB
Without a HUB
With a HUB
) indicator stops
If you want to connect
your Soundbar to the
current wireless router.
Turn off the Soundbar,
relocate it and then turn it
on.
40
Soundbar
Used as a
extender
HUB
If you want to connect your
Soundbar to a different
wireless router.
Turn off the Soundbar, relocate it,
then establish the new connection
as described in the installation
instructions on page 33~39.
Connect a LAN cable between the
HUB and the new wireless router,
turn on the HUB, and follow
"Adding an extra Soundbar to a
HUB that is connected to an
Soundbar" (page 36) step.