WINGTOP SH-6580 User Manual

Introduction
------------------------
Overview
The SH-6580 is only 1U Four in one control center (KVM switch,
KEYBOARD, LCD and MOUSE). It can control up to 8 PCs or 64
PCs by cascade. There is no interface card or software to configure.
Installation is as easy as connecting cables between SH-6580 and
your computers. Operation is as simple as pressing push button,
entering hot-key command and navigating through the user-friendly
on-screen menu. Depending on the model you have, it switches up
to 4 (KVM104D), 8 (KVM108D) IBM-compatible computers.
KVM Switches is independent of the computer operating system.
Two-Console KVM Switches (Optional)
The advanced multi-access KVM Switches enable you to control
multiple computers from two different locations: one is contained in
SH-6580; the other one you can connect from outside, the distance is
up to 30M. KVM208D controls 8 computers.
On-Screen Display (OSD) Menu
For KVM104D, KVM108D,
KVM208D models
For KVM Switches with built-in OSD control, you can name your
computers, switch to a computer from a list, configure settings with
easy-to-use menus, view the name of the selected computer
on-screen with programmable time interval. The OSD displays the
system status throughout operation.
For Monitor with built-in OSD control, you can be easy to set up your
monitor.
1
SH-6580-4(108D) User Guide
The
Automatic Mouse Conversion
The KVM Switches enable you to connect computers with PS/2 or
serial mouse ports (using adapters supplied with each KVM Switches)
and control the computers from one PS/2 mouse(Touch pad). The
KVM Switches automatically identifies the mouse and switches to
proper mouse protocol.
High Video Quality
KVM Switches supports VGA resolution up to 1600x1200 @85Hz
without any degradation (But it is limited by Monitor, so only up to
Monitor resolution). Advanced VGA circuit design guarantees smooth
and flicker-free switching from one computer to the other with
distance up to 100ft (30M)* at both Console and PC sides.
NOTE: The following is the optional KVM Switch and Display models.
Optional KVM Switch Models
OSD
KVM104D
Optional switch
No. of console
1
supported
No. of PC supported 4
Optional DISPLAY Models
Optional
12.1
DISPLAY
Display's
800x600 1024x768
Resolution
* Tested with high-quality UL2919-rated, low-loss and shielded cables.
2
SH-6580-4(108D) User Guide
KVM108D KVM208D
1 2
8 8
13.3 14.1 15.0
1024x768 1024x768