Vision Fitness classic User Manual page 3

CLASSIC
CONSOLE
E
B
O
F
T40,
TF40
Incline
& T80
ONLY
H
4
VF15_TM_Console_TRI_r1_8.indd 4-5
A J
CLASSIC
Start Stop
Incline Speed
Back Enter
T40,
Energy Saver TF40
& T80
ONLY
C N S R M D
CLASSIC CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that
should be removed before use.
A) LARGE LED DISPLAY WINDOW: displays workout time.
B) ALPHANUMERIC DISPLAY WINDOW: displays incline, distance, speed, calories,
pace, workout profile and heart rate.
C) START: press to begin exercising, start your workout, or resume exercising after
pause.
D) STOP: press to pause your workout. Press STOP again to end workout.
E) PROGRAM KEYS: press to select workout.
L
F) INCLINE
Increments).
G) SPEED KEYS: used to adjust speed in small increments (0.1 mph
K
increments). Press and hold to increase speed quickly (maximum increase of 1.0
MPH).
H) INCLINE TOGGLES (T40 & TF40 ONLY): used to adjust incline in small
P
increments (0.5% Increments).
I) SPEED TOGGLES (T40 & TF40 ONLY): used to adjust speed in small increments
(0.1 mph increments).
Q
J) QUICK ADJUST KEYPAD: used to reach desired speed or incline more quickly.
K) SET INCLINE KEY: used to change incline to level entered into keypad.
L) SET SPEED KEY: used to change speed to level entered into keypad.
G
M) ENTER / CHANGE DISPLAY KEY: press to confirm programming selections during
workout setup. Press to change display feedback during workout.
N) BACK: press to go back to the previous step during program setup.
O) USB PORT ACCESS POCKET: USB for software updates or charging devices. *
Speed
P) READING RACK: holds reading material.
Q) MEDIA PLAYER HOLDER: holds your media player or tablet.
R) SAFETY KEY POSITION: enables treadmill when safety key is inserted.
I
S) ENERGY SAVER LIGHT: indicates if machine is in energy saver mode. Press any
key to wake up the machine.
KEYS: used to adjust incline in small increments (0.5%
QUICK ADJUST KEYPAD (J)
CLASSIC
CONSOLE
Quickly access any speed
or incline level by typing
the number and pressing
SPEED ( ) or INCLINE ( ).
Examples:
• To change the speed to
6.5 mph, press 6–5–SPEED
( ).
• To change the incline to 10%,
press 1–0–0–INCLINE ( ).
(NOTE: If there is no decimal
point, you still must enter 0).
* Will not charge USB devices
which require more than 1 amp.
5
4/22/15 10:00 AM