Table of Contents
Advertisement
7.
Read the Bind code to pair the Dragon™ M131 to the OM-30X0 cradle.
The reader is dedicated to the cradle. Any previously bound reader will
be excluded.
To connect several readers to the same cradle see the following section
"Using Multiple Readers with Same Cradle".
The green LED on the Dragon™ M131 will blink: the reader is ready to
be positioned onto the cradle.
8.
Firmly position the reader onto the cradle within 10 seconds, a beep will
be emitted, signaling that the OM-30X0 cradle has been paired to the
Dragon™ M131, and the green LED on the reader will go off.
Configure the OM-30X0 cradle, refer to the "OM-30X0 Quick
9.
Reference".
END of procedure. YOUR READER IS NOW READY TO READ CODES.
Ì$+RN0$-IÎ
Green LED
Bind
DRAGON™ M131
7
Advertisement
Table of Contents
