Fit The Lid; Attaching Labels; Operation; Cleaning, Care & Maintenance - Buffalo G107 Instruction Manual

Telephone Helpline: 0845 146 2887 (United Kingdom)

Fit the Lid

Slot the lid on top of the appliance
1.
Note: The lid is hinged in the middle. Lift one half of the lid to access the container.

Attaching Labels

Slide the relevant label into the magnetic label holder.
1.
Attach the holder to the side of the appliance.
2.
Note: If the desired label is not included, simply write the name of the product on the
reverse of one of the labels.

Operation

Connect the appliance to the mains power supply.
1.
Fill the outer container with approximately 600ml of water.
2.
Carefully place the inner container into the appliance.
3.
Note: The inner container must NOT float, even when empty. If the container floats
reduce the amount of water in the outer container.
Fill the inner container with hot soup and close the lid.
4.
Note: If necessary, remove any excess water from the outer container.
Set the temperature control. The temperature ranges from 1 (lowest) to 12 (highest).
5.
The Power light will come on and the kettle will begin to heat up.
6.
Note: Kettle is not designed to heat food from cold.
Reduce the temperature to maintain heat levels. To maintain temperature, BUFFALO recommend the
7.
lowest heat setting possible.
Use a suitable implement to remove the contents of the kettle. DO NOT tip the kettle to remove the
8.
contents.
To turn the appliance Off, set the Temperature Control to '0'.
9.
WARNING: Never move or carry the appliance when it is switched on or contains hot
liquid.
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Clean any spilt food on the appliance immediately.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• The inner container and lid are machine washable.
• Dry thoroughly after cleaning.
UK
2