Canon PowerShot ELPH 170 IS User Manual page 13

3
Set the home time zone.
z Press the <q><r> buttons to choose
your home time zone.
4
Finish the setup process.
z Press the <m> button to complete the
setting. The setting screen is no longer
displayed.
z To turn off the camera, press the power
button.
• Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose [
choose [ ] by pressing the <o><p> buttons.
Changing the Date and Time
Adjust the date and time as follows.
1
Access the camera menu.
z Press the <n> button.
• Date/time settings can be retained for about 3 weeks by the camera's built-in
date/time battery (backup battery) after the battery pack is removed.
•
The date/time battery will be charged in about 4 hours once you insert a
charged battery pack or connect the camera to an AC adapter kit (sold
separately,
] in step 2 and then
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
described in "Setting the Date and Time"
2
Choose [Date/Time].
z Move the zoom lever to choose the [3]
tab.
z Press the <o><p> buttons to choose
[Date/Time], and then press the <m>
button.
3
Change the date and time.
z Follow step 2 in "Setting the Date and
Time" (= 12) to adjust the settings.
z Press the <n> button to close the
menu.
= 81), even if the camera is left off.
(= 12).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
13