Download Print this page

White's SpectraSound Setup

Your SpectraSound Wireless headphone

system has been designed from the

ground up with a single purpose -

TO WORK PERFECTLY WITH YOUR

Spectra

METAL DETECTOR!

SpectraSound is not an off-the-shelf system adapted for metal detection

use. A single button on the headset turns SpectraSound

All other functions are a part of your Spectra Metal Detector.

Dependable - Comfortable - no-delay real-time audio that matches per-

fectly your detectors sweep speed and speaker response.

Set Up -

Locate battery door- open by turning counter clockwise to

"Open" position.

Install (2) AA Batteries (provided) Take care to orient batteries

per embossed example- one up- one down.

Replace Battery door- turn clockwise to "Lock" position.

SpectraSound™ System comes factory pre-connected

(channel 4) allowing the "Quick Connect Sequence".

(see back page).

SpectraSound

Part Number 802-5282

FCC#

R8KUGWM1USHN33A.

™

and OFF.

Table of Contents

Need help?

Do you have a question about the SpectraSound and is the answer not in the manual?

Page 1 TO WORK PERFECTLY WITH YOUR Spectra METAL DETECTOR! ® SpectraSound is not an off-the-shelf system adapted for metal detection use. A single button on the headset turns SpectraSound and OFF. All other functions are a part of your Spectra Metal Detector.
Page 2 If there is significant wireless channel interference, the built in speaker will occasionally sound. A different Wireless channel should be considered. To avoid cross talk between additional V3 detectors with Spectrasound headphones, set each to a different wireless channel. Connect Sequence “AFTER CHANNEL CHANGE” – MENU/TAB to...
Page 3 • Increase Wireless Power • Turn OFF Monitor Speaker. • Check Wireless Battery. • See above voltage - replace as needed. For more information on SpectraSound system, including connecting to two or more headphones, please see the “Complete Owner’s Guide”.
Page 4 You will hear The metal detector speaker will connect within ten seconds. More options available in “Complete Owner’s Guide”. - SpectraSound™ Headphones - Manufactured in Sweet Home, Oregon USA P/N 621-0513 Printed in USA 3/09...