Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Angler SFS-300
- Page 1 SFS-300 INSTRUCTIONS...
- Page 2 Introduction Congratulations on your purchase of the Angler SFS-300. The pro-style SFS-300 provides 300 watts of smooth light with focusing ability and is an ideal fixture for quick and easy set-ups on location or in the studio. It features a convenient cool-touch handle and a 12.5-ft. AC cable with an in-line, heavy-duty, rocker power switch.
- Page 3 Contents Four-way barndoor set Safety Glass Impact JCD Lamp 300W, 120V Also included: User manual One-year limited warranty...
-
Page 4: Operating Instructions
When properly installed, the barndoors are free to rotate 360°. Mount on light stand The SFS-300 mounts on any standard, 5/8˝ diameter light stand. Loosen the light stand lock knob (1), and seat the mounting spigot onto the top of the light stand. - Page 5 Adjust light angle Loosen the angle tilt knob (2), and position light angle as desired. Retighten tilt knob. Do not overtighten. Connect to power supply Plug power cord into a grounded 110/120V AC power supply only. Switch on power Rock the power switch (3) to the “on” position (...
- Page 6 Note It is normal for the SFS-300 to smoke for a few minutes when first used, as the intense heat from the lamp initially burns off manufacturing residues. Smoking for longer than 15 minutes, however, is not normal, and may indicate a malfunction. If so, discontinue use and return to place of purchase.
-
Page 7: Changing The Lamp
Changing the lamp 1. Disconnect unit from power supply. 2. Allow light to cool to room temperature before handling. 3. Remove safety glass by unscrewing the three retaining screws. 4. Remove expired lamp by pulling it straight out of the socket. 5. -
Page 8: Specifications
SPECIFICATIONS Synthetic housing, convection vented Construction cooling Reflector 4˝ anodized aluminum 21-40° Light beam spread 2-pin (GY9.5) Socket Switch Inline power cord 120V AC Power cord 5/8 inch Mount WEIGHT 3.46 lbs. (1.5 kg) 8.75 ʺ × 8.75 ʺ × 6 ʺ Dimensions (22 ×... - Page 9 Warnings Quartz lamps generate extreme heat. To avoid injury, do not touch the light housing while lamp is lit. Allow light to cool to room temperature before storing or handling. To prevent bulb failure, do not bump or jar unit while lamp is hot. Do not operate unit without the safety glass installed.
-
Page 10: Power Requirements
If necessary, use only grounded extension cords rated for 6 amps Safety Glass The SFS-300 is supplied with a heat-resistant safety glass to prevent personal injury or property damage should the lamp shatter. Never operate the light without the safety glass in place. -
Page 11: One-Year Limited Warranty
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s... - Page 12 anglerlights.com...
Need help?
Do you have a question about the SFS-300 and is the answer not in the manual?
Questions and answers