1. Remove all bodywork.
2. Remove Tires & Wheels, Rollbar
etc...
3. Remove Side Plates. These
will be the last thing you put on.
4. Remove Engine and Gas tank.
Big Boys Toys and Hobbies
6. Take the diff apart keeping all
spider gears intact.
7. Remove diff from new kit. It will come
out you dont have to loosen anything.
8. Insert the chainwheel shell in to the
diff. Make sure you put the gear on first
then slide the diff down of the shaft. This
is important b/c you cannot get it back
apart once together. USE LOCK TIGHT!
www.bigboystoysandhobbies.com
5. Rear Diff needs to come out.
Everything
else
you
together.
can
leave
866-237-7366