Using The Red-Eye Fix Function; 1St Curtain, 2Nd Curtain; Adjusting The Iso Sensitivity - Samsung NX10 Quick Start Manual

Taking a picture in a dark place
Using the red-eye fix function
When taking a portrait shot in a dark place, the red-eye effect can
occur with the burst of flash light. In this case, please set the flash
option to Auto+Red or Fill-in Red.
effect can be removed through the preliminary
flashing function prior to the burst of flash.
the camera at the time of preliminary flashing, the
function may not function well.

1st Curtain, 2nd Curtain

The following images were obtained by taking the pictures of
straight-moving subject along with the respective options of 1st
Curtain and 2nd Curtain. In case of using the 1st Curtain flash
function, the front part of action is remained clearly since the flash
will burst light immediately upon shutter opening. Since the flash
bursts the light at a later time when having used the 2nd Curtain
option, the picture expresses the last image of the subject clearly.
Ball moving direction
Use of early 1st
Curtain option
46
Ball moving direction
Use of 2nd Curtain option

Adjusting the ISO sensitivity

The ISO sensitivity, as the film sensitivity established by the
international standards organization (ISO), represents the degree of
reaction when camera receives light. Since it reacts more sensitively
with greater ISO value, a natural shot can be obtained in a dark
place by raising the ISO value. This reduces the degree of camera
shaking with faster shutter speed.
1
In Shooting mode, press [MENU].
2
Select Shooting 1 ( ) → ISO → an option.
1
noise you may get.
noise caused by the high-sensitive ISO(3200) can
be reduced. (CD-ROM User manual, page 52)
depending on the selected Shooting mode.
in the shooting mode.
ISO]