Eng302 - Makita HR2800 Instruction Manual

Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model HR2810, HR2810T
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model HR2811F, HR2811FT
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2
) : 2.5 m/s or less
h,D
2
) : 89 dB(A)
pA
) : 100 dB(A)
WA
value (tri-axial vector
2
) : 15.5 m/s
h,CHeq
2
2
) : 20.0 m/s
h,HD
2
2
) : 2.5 m/s or less
h,D
2
) : 90 dB(A)
pA
) : 101 dB(A)
WA
value (tri-axial vector
2
) : 11.5 m/s
h,CHeq
2
2
) : 15.0 m/s
h,HD
2
2
) : 2.5 m/s
h,D
2

ENG302-2

The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENG102-3
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENG215-2
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
sum)
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC Declaration of Conformity
ENG303-2
We Makita
manufacturer declare that the following Makita
machine(s):
ENG302-2
Designation of Machine:
Rotary Hammer
Model No./
HR2811F, HR2811FT
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
ENG102-3
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
ENG215-2
Milton Keynes, MK15 8JD, England
sum)
000230
ENG303-2
ENG301-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
5
Corporation as the
Type: HR2800, HR2810,
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENG901-1
ENH101-12
responsible
HR2810T,
GEA010-1