Intel pocket concert Quick Start Manual

®
Intel Pocket Concert™
Audio Player
Quick Start Guide
®
Player in the optional Intel Audio Stereo Dock
Setting Up Your Player
NOTE: Install the Player software before connecting the Player to your computer.
Connecting the Player to your computer before successfully installing the Player software
could cause the Player to operate incorrectly.

Installing the Batteries

1. Press the blue tab on the
battery cover
from the Player.
2. Insert the batteries. Ensure that the batteries are
oriented correctly as shown.
3. Replace the .
battery cover
CAUTION: Use only AAA non-rechargeable alkaline batteries,
like those supplied in the optional Accessory Kit. Other battery types could damage your Player.

Connecting the Headphones

• Connect the headphone cord to the headphone jack
Intel ® Pocket Concert™ Audio Player.
The headphones provided with your Player are designed to
be worn as shown, with the headband positioned around the
back of your head.
Listening to the Guided Tour
Your Player comes with a pre-loaded audio file entitled Guided Tour introducing you to the Player's
features and capabilities. To listen to the Guided Tour :
1. Move the to the On position. (see the Player Controls section for information)
power/lock switch
2. If necessary, use the to select Guided Tour .
scroll wheel
3. Press the play/pause button.
Connecting the Belt Clip
• Connect the supplied to the back of the Player one side at a
belt clip
time as shown.

Removing the Belt Clip

• Press the arrow on the back of the
belt clip
the belt clip up towards the top of the Player.
and slide it away
AAA rechargeable NiMH batteries
or
on the
against the Player and slide