Table of Contents
Advertisement
3.
Select the
menu and press the controller.
4.
Select "Communication settings" and
press the controller.
5.
Select "Bluetooth" and press the controller.
6.
Select "Settings" and press the controller.
The Bluetooth link is activated.
7.
Select "Bluetooth communication active"
and press the controller to activate or deac-
tivate the link.
Adjusting volume
Turn the knob during a call to select the desired
volume.
This volume for the hands-free system is main-
tained, even if the other audio sources are set to
minimum volume.
You can also adjust the volume with buttons on
the steering wheel, refer to page 10.
166
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG
The setting is stored for the remote control cur-
rently in use.
Operation via iDrive
You can operate the following functions using
iDrive:
>
Dialing phone numbers
>
Selecting phone numbers from the phone
book
>
Selecting stored phone numbers, e.g. from
the list of accepted calls
>
Ending a call
When the ignition and radio readiness are
switched off, e.g. after taking the remote control
out of the ignition switch, you can continue an
ongoing call via the hands-free system for no
more than 25 minutes.
Requirements
The mobile phone's pairing data are stored by
the vehicle and the mobile phone is operational.
The engine is running or the ignition is switched
on.
The mobile phone is recognized by the vehicle.
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Move the controller forwards to call up
"Communication".
Receiving calls
If you have the phone number of the caller
stored in the phone book and the phone num-
Hide quick links:
Advertisement
Table of Contents
