Related Manuals for Warm House EH0221
Summary of Contents for Warm House EH0221
- Page 1 Instruction Manual EH0221 Arched Glass Electric Fireplace Please read these instructions thoroughly before use and retain for future reference.
-
Page 2: Important Safety Instructions
Important Safety Instructions When using this electrical appliance, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to person, including the following: This appliance must be used on an AC supply only and the voltage marked on the heater must correspond to the supply voltage. -
Page 3: Getting Started
Do not cut off bracket or change shape of the bracket. Do not use the appliance in the immediate surroundings of a shower, bath or a swimming pool. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. -
Page 4: Helpful Advice Before Fitting
Helpful Advice Before Fitting Please retain all packaging until you have checked and counted all the parts and the contents of the fixing pack against the parts list. The fixing pack contains small items which should be kept away from young children. We suggest that you open the fixing pack and place all the contents into a container, therefore reducing the risk of losing any small pieces. - Page 5 This appliance is designed to be permanently fixed to a wall at a minimum height of 600mm. The wall bracket must be fitted horizontally and the cable routed to the bottom right of the heater. A height of 600mm from bottom of heater to floor is recommended for optimum viewing of fuel bed see fig.1 for recommend fixing dimensions.
-
Page 6: Fitting The Feet
Fig 2 1045 Fitting the Feet The box contains two plastic feet and four screws for each foot. Place the fireplace on a flat, stable surface with the back of the fireplace resting on the surface. Push the feet onto the base of the fireplace and fit the screws in place. Stand the fireplace up and ensure that it is placed at least 15cm away from the wall. -
Page 7: Manual Operation
Instructions for Use The fireplace can be operated either by the switches (located on the top right hand side of the fireplace) or by the supplied remote control. Manual Operation The switches are located at the top right hand side of the fireplace. The standby switch must be switched on first. -
Page 8: Troubleshooting
Troubleshooting Symptom Solution No operation/no fan. Check the fuse in the plug. Replace if necessary. The safety cut-off may have operated. Please allow it to cool down for 15 minutes, then switch it back on. No fire effect light. Check if the LED’s are working. Cleaning Warning: Always disconnect from the power supply before cleaning the fireplace. - Page 9 The crossed out wheelie bin symbol on this item indicates that this appliance needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authority for details of where to take the item for recycling.
Need help?
Do you have a question about the EH0221 and is the answer not in the manual?
Questions and answers
where to buy bracket for EH0221
The bracket for the Warm House EH0221 is included with the appliance in the box.
This answer is automatically generated