Alpina BL 260H User Manual

Hide thumbs Also See for BL 260H:

Advertisement

Quick Links

INTRODUCTION
Dear Customer,
thank you for choosing one of our products. We hope that you will be completely satisfied with this
machine and that it fully meets your expectations. This manual has been compiled in order to provide
you with all the information you need to get acquainted with the machine and use it safely and effi-
ciently. Don't forget that it is an integral part of the machine; keep it handy so that it can be consulted
when necessary, and pass it on to a further user if you resell or loan the machine.
Your new machine has been designed and manufactured in pursuance with current regulations, and is
safe and reliable if used in full compliance with the instructions provided in this manual (proper use).
Using the machine in any other way, or non-compliance with the safety specifications relative to use,
maintenance and repair is considered "improper use" which will invalidate the warranty, relieve the
manufacturer from all liabilities, and the user will consequently be liable for all and any damage or injury
to himself or others.
Since we regularly improve our products, you may find slight differences between your machine and
the descriptions contained in this manual. Modifications can be made to the machine without notice
and without the obligation to update the manual, although the essential safety and function charac-
teristics will remain unaltered. In case of any doubts, please contact your dealer. And now enjoy your
work!

TABLE OF CONTENTS

1.
Identification of the components .............................................. 2
2.
Symbols ..................................................................................... 3
3.
Safety requirements .................................................................. 3
4.
Prepare the machine ................................................................. 6
5.
Preparing to work ...................................................................... 6
6.
How to start - Use - Stop the engine ........................................ 8
7.
Using the machine ..................................................................... 9
8.
Maintenance and storage ........................................................ 10
9.
Identification of faults .............................................................. 11
10. Technical specifications ........................................................... 12
IN NORMAL WORKING CONDITIONS THIS MACHINE
CAN INVOLVE EXPOSURE TO NOISE LEVELS OF 85 DB (A)
OR HIGHER TO ANYONE OPERATING THE MACHINE
WARNING!!!
HEARING DAMAGE RISK
1
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BL 260H and is the answer not in the manual?

Questions and answers

Summary of Contents for Alpina BL 260H

  • Page 1: Table Of Contents

    INTRODUCTION Dear Customer, thank you for choosing one of our products. We hope that you will be completely satisfied with this machine and that it fully meets your expectations. This manual has been compiled in order to provide you with all the information you need to get acquainted with the machine and use it safely and effi- ciently.
  • Page 2: Identification Of The Components

    IDENTIFICATION OF THE COMPONENTS 1. IDENTIFICATION OF THE COMPONENTS PACKAGING CONTENTS AND IDENTIFICATION OF THE COMPONENTS 1. Power unit To use as vacuum collector: To use as a blower: 2. Graduated fuel bottle 6. First vacuum tube 4. First blower tube 3.
  • Page 3: Symbols

    IDENTIFICATION OF THE COMPONENTS - SYMBOLS - SAFETY REQUIREMENTS IDENTIFICATION PLATE (10) 10.1) Conformity mark according to directive 2006/42/EC 10.2) Name and address of the manufacturer 10.3) Acoustic output level LWA in accordance with 10.1 10.5 10.2 10.4 10.3 directive 2000/14/EC. 10.4) Manufacturer’s model of reference 10.5) Machine model 10.6) Serial number...
  • Page 4 SAFETY REQUIREMENTS perator and others. in particular: Any other use may be dangerous and damage – the throttle trigger must move freely, it must the machine. not need forcing and should return automati- 3) Never allow children or persons unfamiliar cally and rapidly back to the neutral position;...
  • Page 5 SAFETY REQUIREMENTS tings or overspeed the engine. with worn or damaged parts. Damaged parts 8) Do not strain the machine too much and do are to be replaced and never repaired. Only not use a small machine for heavy-duty works. If use original spare parts.
  • Page 6: Prepare The Machine

    PREPARE THE MACHINE - PREPARING TO WORK 4. PREPARE THE MACHINE The machine can be used as both a blower and 2. USE AS A VACUUM COLLECTOR (Fig. 2) a vacuum collector; for both of these uses it is necessary to correctly arrange the appropriate –...
  • Page 7 PREPARING TO WORK • Petrol characteristics IMPORTANT The fuel mixture tends to age. Do not prepare excessive amounts of the Only use unleaded petrol with a fuel grade of at fuel mixture to avoid the formation of deposits. least 90 ON. IMPORTANT Unleaded petrol tends to IMPORTANT...
  • Page 8: How To Start - Use - Stop The Engine

    HOW TO START - USE - STOP THE ENGINE 6. HOW TO START - USE - STOP THE ENGINE STARTING THE ENGINE • Hot starting When hot starting (immediately after stopping WARNING! The engine must be star- the engine), follow the procedure indicated ted in an area at least 3 metres from where above in points 1 - 4 - 5 - 6.
  • Page 9: Using The Machine

    USING THE MACHINE 7. USING THE MACHINE To respect people and the environment: 2. USE AS A VACUUM COLLECTOR (Fig. 6) – Try not to cause any disturbance. WARNING! The machine must al- – Scrupulously comply with local regulations ways be firmly held with both hands during and provisions for the disposal of waste work.
  • Page 10: Maintenance And Storage

    MAINTENANCE AND STORAGE 8. MAINTENANCE AND STORAGE Correct maintenance is essential to maintain the FUEL FILTER original efficiency and safety of the machine over time. Inside the fuel tank there is a filter which pre- vents impurities from entering the engine. The filter should be replaced once a year by your WARNING! During maintenance ope-...
  • Page 11: Identification Of Faults

    MAINTENANCE AND STORAGE - TROUBLESHOOTING thoroughly to remove all dust and debris, and re- in the carburettor. pair or replace any faulty parts. – Wait for the engine to cool down and remove The machine must be stored in a dry place away the spark plug.
  • Page 12: Technical Specifications

    TECHNICAL SPECIFICATIONS 10. TECHNICAL SPECIFICATIONS MODEL ..................... BL 260H Piston displacement ............... cm 25,4 Power ....................kW Spark plug ....................Torch L8RTC Petrol/oil ratio ..................50 : 1 Tank capacity ................liters Operator ear noise pressure level ..........dB(A) Measurement uncertainty (2006/42/EC - EN 27574) ....dB(A) Measured acoustic output level .............

Table of Contents