Subscribe to Our Youtube Channel
Related Manuals for Audion Platinum Hybrid
Summary of Contents for Audion Platinum Hybrid
-
Page 1: Power Amplifier
Platinum Hybrid Power Amplifier User Manual Models Covered Power Amplifier Revision 1.0 Platinum - 1 - Audion International... - Page 2 Congratulations on your purchase of the acclaimed “Platinum” power amplifier from Audion. Your Audion Amplifier is the result of nearly 20 years exhaustive research and development culminating in our current world class product. All our amplifiers are hand built using only the finest components available.
- Page 3 Before attempting to connect your Audion Platinum Hybrid please read carefully, and understand thoroughly the contents of this manual. Keep this manual near you when installing your Audion so it is handy for reference. This manual is designed to assist both novice and experienced persons in achieving satisfaction from your Audion.
- Page 4 Installation Positioning Your Audion You will probably have in mind the location to place your Audion but remember, The Platinum Hybrid power Amplifier gets warm and needs a good circulation of air. The units should be placed in a suitable environment to enable airflow. Allow approx. 50mm clearance to the lid, avoiding covering the front or sides, this will allow thermal conduction of the heat.
- Page 5 On the front panel locate the on/off button. Push the button inwards, this has now turned your Audion on. Your Audion is now “Warming up”. We recommend that an initial few minutes is allowed for the warm up process to take place.
-
Page 6: Technical Specifications
Enjoy your Audion. Technical Specifications Platinum Hybrid Power Amplifier Power: 40 Watts Class A into 8 Ohms at 240V AC Load: 4 – 8 Ohm Nominal Distortion @ 1Watt: <0.1% No Feedback Frequency Response: 10Hz –34KHz ±3 db Sensitivity: Variable >150mV Full output Noise: <...
Need help?
Do you have a question about the Platinum Hybrid and is the answer not in the manual?
Questions and answers