Getting Started - Gear4 AirZone Series 1 User Manual

AirZone Series 1
Features:
■ AirPlay
■ FM radio with programmable presets
■ Volume control dial
■ Charges iPod / iPhone / iPad
■ Line-in port for use with other music players
■ 6 EQ settings plus OFF

Getting started:

■ Plug the power cable into the back of the unit
and then into the mains supply.
■ To switch the speaker on, press the power
switch at the back of the unit.
■ GEAR4 will appear on the LCD display for
approximately 30 seconds whilst the Wi-Fi
module configures. 'AirPlay' will then appear
to indicate the speaker is ready for set-up.
■ To switch between modes, press the MODE
button to scroll between the options (AirPlay /
FM / AUX / iPod ).
Set-up:
■ To switch between modes, press the MODE
button to scroll between the options (AirPlay /
iPod / FM / AUX).
2 GEAR4 | AirZone Series 1 | User Manual
Please read before use.
■ To stream music wirelessly to the AirZone
Series 1, the unit first needs to be registered
to your wireless home network.
■ Press the MENU button on the remote control.
Press or
Press ENTER. Scroll again using the
keys until the desired network is shown.
■ Press ENTER and then input your Wi-Fi pass
code. Use the
VOLUME CONTROL to scroll between
characters. Move to the next character by
pressing
speaker. Press Enter when finished. After a
few seconds the display will show 'Wi-Fi'.
■ Now press MODE to return to the main
screen. Your speaker is set-up and ready to
use. You only need to perform this
configuration once.
Note: Depending on the configuration of your
Wi-Fi router, your password may be case-
sensitive. Please check before entering your
Wi-Fi password into the AirZone Series 1.
For use with iPod touch / iPhone
/ iPad / PC / Mac using iTunes:
■ Using your iPod touch, iPhone, iPad or iTunes
on your PC or Mac, you can stream music
wirelessly to the AirZone Series 1, over Wi-Fi.
to scroll until Wi-Fi is shown.
or keys or the ROTARY
on the remote control or on the
or