Table of Contents
Advertisement
L
PLAYBACK MODE
Playback
To view images or videos on your camera's screen, slide the
Mode Switch to the Playback position. From the Main Screen,
you can view images, play videos or delete files.
Playback Tips
Pressing the Up button will show a quick review of the
Playback commands. The commands are:
Up - Play Video
Left - Previous file
Right - Next file
OK - Toggles between Single View and Matrix View
Down - Delete file
Page 16
M-999i Digital Game Camera
PLAYBACK
Press OK to begin viewing
images
Press
5
for Playback tips
^
Play Video
< Previous
OK
Next >
Single/Matrix
View
Delete File
v
B
QUICK START INSTRUCTIONS
Use the steps below as a guide to quickly set up your camera so it will function using the factory
default settings.
STEP 1
Open camera cover. Press the battery chamber release button. Install eight (8) AA size alkaline or
lithium batteries with polarities as indicated in the Battery Tray. Re-install the Battery Tray and insert
your SD card. We recommend that you erase the SD card (ERASE IMAGES) inside the camera before
taking pictures: this will not only erase all images, but will also format your SD card for use in the camera.
STEP 2
Insert SD Memory Card until you hear an audible click. Camera will not operate without SD Card.
Slide the power switch to Quick Start. Press the Left button to set the time and date.
STEP 3
Mount camera in desired location using a mounting
strap. NOTE: Camera must be attached to a stable
object for motion detection to function properly.
Mounting camera on an unstable structure may
result in excess image captures with no subject
(false triggers).
STEP 4
Switch camera to Aim. Aim camera using motion
detection to determine target area. Walk in front of the
camera at the desired distance and the camera LED will flash
showing the covered area. Switch camera to Quick Start.
STEP 5
Close cover. The camera will operate using Default settings. You may also customize the settings
if desired in Custom Start.
Setting Run Mode
When you choose Quick Start, the only settings that
you will be able to change will be Date and Time, allowing
for rapid setup. Other settings are:
M-999i Digital Game Camera
Eyelet
Mounting
Strap
OPTION
SETTING
Mode
Motion Detect
Detection Delay
30 seconds
Multi-Shot
3-Triggered
Photo or Video
Photo
Page 5
Hide quick links:
Advertisement
Table of Contents
