Polaris Sportsman X2 850 Owner's Manual For Maintenance And Safety page 46

FEATURES AND CONTROLS
Passenger Seat
Seat Conversion
5. Lift the adjustment latch at the top of the passenger backrest. Raise
the backrest to the desired position. Release the latch, making sure
it locks into one of the three operating positions.
Tip: The backrest must be moved out of the lowest position before it can be
secured in the upright position. The lowest position is for seat storage only.
Do not leave the backrest in the lowest position. Always adjust the backrest
to one of the three operating positions.
6. Lower the operator
backrest to create the
passenger seat. Two
retaining pins under the
seat should fit into the two
grommets on the seat base.
7. Test the passenger seat
lock-out by attempting to
release the cargo box dump
latch. See page 79. If the
dump latch releases, the
seat is not secure. Repeat
the set-up procedure. If the
lock-out is not working
properly, do not allow a
passenger to ride the vehicle. See your POLARIS dealer for ser-
vice.
8. To return the vehicle to single-rider
operation, reverse all steps. Always
lower the passenger backrest to the
lowest position before folding it
down into the cargo box. Slide the
seat latch levers outward to secure the
locks.
42
Backrest
Passenger
Adjustment
Latch
Locked