Diagram Of Parts; Before First Use - Mr. Coffee BVMC-MF Series User Manual

DIAGRAM OF PARTS

1. Lid
2. Frothing Cup
3. Spout
4. Cup Handle
5. Frothing and Stirring Disk
6. Power Base
7. Disk Storage (underneath
the power base)
CONGRATULATIONS ON YOUR BRAND NEW
AUTOMATIC MILK FROTHER!
We know taste matters. For us, bringing a rich coffee
experience into your home has always been an obsession.
With this easy to use Milk Frother you can make your favorite
café style drinks from a mocha cappuccino to an iced
Chai tea latte. Froth lovers can float away in LIGHT, FLUFFY
DELICIOUSNESS and enjoy the creamy-best taste!
1.
3.
4.
2.
6.
7.
-6-
USING YOUR AUTOMATIC

Before First Use

Make sure your first latte or cappuccino is as good as can be
by cleaning your MR. COFFEE Automatic Milk Frother before
its first use.
1. Wash the inside of the frothing cup, the lid and frothing disk
with mild detergent and water. Rinse each thoroughly. For
convenience these 3 items are dishwasher-safe.
CAUTION: Do not immerse the power base in water or
5.
any other liquid.
2. Do not use scouring pads, steel wool or any form of
strong solvents or abrasive cleaning agents to clean the
appliance, as they can damage the external surfaces of
the appliance.
3. Allow the appliance to dry fully after cleaning before using.
SETUP
1. Position the power base on a
flat, heat resistant surface, as
close as possible to a power
outlet.
CAUTION: Do not operate
appliance if power base is
not flat.
2. Install frothing disk into the base of
the frothing cup. (Figure 1)
CAUTION: CHOKING HAZARD - Small
parts. Not for children. Use with adult
supervision only.
3. Add fresh cold milk to the desired level
and place lid on top. (Figure 2).
CAUTION: Do not exceed the "MAX" level
mark indicated inside the pitcher.
MILK FROTHER
-7-
Figure 1
Figure 2