You should charge the iDroid Fit for 30mins before using it. Pull out the host as shown below, Insert the host to a 5V/1A USB port for charging. The indicating light stops flashing when it is full charged for 30 minutes.
Page 4
Account set-up: Open the “Zeroner” App. Login if you have an account, or register a new account. IDroid Fit Operation Instruction. You can use the iDroid Fit by “wrist gesture” or “screen touching”. It is convenient to check the time by “wrist gesture”. Keep the iDroid Fit screen Then turn wrist over.
Click the screen Confirm Long press the screen PS: Function may be changed and upgraded according to the iDroid Fit hardware’s update. For further information, please refer to “Help” option on APP. Pairing Keep your phone with Bluetooth and WIFI “on” for this step. Keep the screen lighting and the fitness band show...
Page 6
Login the App Zeroner, and the Double press the button on the iDroid system shows the main page. Tap Fit, the radar icon ”shows up on the the left corner button or slide the iDroid Fit, Tap the button screen from left to right, and click 【Searching device】...
SYNC Data The iDroid Fit SYNC data automatically after connected with phone by APP (Zeroner), the iDroid Fit time will be calibrated same as the time of phone. SYNC data includes: steps, calorie, and distance. You can check out if the data SYNC is completed successfully on the APP.
Alarm clock Add alarm by the Alarm, when it comes to t h e settled , the band will shake to make a reminder and shows alarm icon Camera remote controller Open the camera by APP, the band will show camera icon Camera remote controller realized by long pressing the icon.
(12-1) (12-2) (12-3) (12-4) OTA Upgrade Attention: the phone screen must be kept lighten when using this function in this process, the APK, APP can’t be hidden in the backstage.
Page 10
When a new iDroid Fit firmware uploaded to the server, there will be a upgrade reminder in APP, APK, take the following steps:(13-1 to 13-6) (13-1) (13-2) (13-4) (13-3)...
Page 11
(13-5) (13-6) Two situations will be existed while update: Situation 1: Waiting for a moment at this time:...
Page 12
At this time, when the progress bar reaches 100% , it displays as “the upgrade is complete”, then long-press the iDroid Fit can be switched on, next reconnect the iDroid Fit and enter the firmware upgrade again, when there shows “Already Newest Ver.”, Congratulations, upgrade successfully! ! !
Page 13
Waiting for a moment, there may be a chance for this situation: By this time, upgrade again, if there is no response, reconnect the iDroid Fit, and repeat the upgrade steps! When the situation 1 occurs, congratulations, upgrade successfully!! !
Need help?
Do you have a question about the Fit and is the answer not in the manual?
Questions and answers