Download Print this page

Zavio S5040 Quick Installation Manual

Hide thumbs Also See for S5040:

Advertisement

S5040/S5080
8608552000010
0

Advertisement

loading

Summary of Contents for Zavio S5040

  • Page 1 S5040/S5080 8608552000010...
  • Page 2: Table Of Contents

    Zavio S5040/S5080 Quick Installation Guide Please follow the below instruction and the installation steps to set up your S5040/S5080 SNVR. Package Contents. See P.1 Physical Overview. See P.2 LED Indicator Definition. See P.2 I/O Terminal Block Circuit. See P.3 Install the hardware and connect all cables. See P.4 First-time use –...
  • Page 3: Physical Overview. See

    Physical Overview a. Front Panel Power button: Power On/Off NVR LED Indicator Definition Color Indication Flash Blue Booting up process Power Steady Blue Booting up competition System exception alert is detected , such as disk full, disk error, no disk, network disconnect, illegal Warning login, disk over temperature, fan fail, network fail, power loss and IP conflict.
  • Page 4: I/O Terminal Block Circuit. See

    I/O Terminal Block Circuit The alarm input/output interface of the NVR is shown below. Connect the alarm inputs Configure the alarm inputs as N/O or N/C in the NVR UI system. Each (alarm) input line can be switched by a contact from external devices. Wire them as either Normally Open or Normally Closed.
  • Page 5 Install the HDD and connect all cables 1. Remove all the screws on the rear panel. 2. Slide out the top cover. 3.Slide in HDD. 4. Use the screws attached in accessory to mount HDD with the bracket. 5. Connect SATA connection cable & SATA power cable to HDD.
  • Page 6 Connections: Note: 1. Monitor: Supporting display mode from 1024x768 up to 1920x1080 2. RS-485: Connect a pan/tilt/zoom control unit to the RS-485 port through the supplied terminal block.
  • Page 7: First-Time Use - Install Wizard. See

    First-time use – install wizard When the first time connect IP cameras to the NVR, the NVR will pop up install wizard window. Full Auto Install Mode Click “Full Auto Install” and then the NVR will automatically configure IP address of a camera connected by LAN.
  • Page 8 Step 2. Device setting:  Device name: User can change the device name.  Language: User can select the desired display language.  Enable authentication: User can select enable or not.  Keep recorded data in hard disk: User can select to keep or not. ...
  • Page 9 Step 4. User can configure Date/Time settings of the NVR. After finish the Date/Time settings, please press “Apply” to save user’s changes and proceed to the next step.  Adjust Time : Click on the column and the Calendar will pop up on screen for user to adjust the system date and time.
  • Page 10 Step 6. After NVR gets the specific IP cameras, it will display the IP camera list. User can click “Add” button to add IP camera into desired channel. Step 7. After adding IP cameras into NVR, NVR will start to configure the parameters of the IP cameras.
  • Page 11 Step 8. When NVR finish the configuration of the IP cameras, it will pop up the success message and IP camera also successfully add into NVR.
  • Page 12: Appendix: Compatible Hdd List. See

    Appendix: Compatible HDD list HDD Manufacturer Model Capacity Seagate SV35 Seagate SV35 Seagate SV35 AV-GP AV-GP AV-GP AV-GP WD4000FYYZ WD4000F9YZ WD3000F9YZ WD2000F9YZ WD30EURX TOSHIBA DT01ACA300 TOSHIBA DT01ACA200 TOSHIBA DT01ACA100 TOSHIBA DT01ACA050 500GB TOSHIBA DT01ABA300V...
  • Page 13 Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. …………………………………………………………………………………..
  • Page 14 Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. …………………………………………………………………………………..
  • Page 15 Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. …………………………………………………………………………………..

This manual is also suitable for:

S5080