Advertisement
Tw inhead
Name of S.O.P﹕F9DA System Ass'y SOP
Explanation for illustration
3
Part name / Specification
Difference
Operating Item
1
NA
W/BLUE
F10DA1-WLAN/BLUETOOTH
TOOTH
W/CABLE-F4262
2
W/O BLUE
WLAN W/CABLE-F4371-F10DA1
TOOTH
SCREW ISOT-M2X3L-SELF-LOCK
3
INGD3.5mm t=0.8mm-B4424H
4
NA
Tw inhead International (Kunshan) CO.,LTD
Twinhead S.O.P
Document NO:TESOP587
Working name：7008
Revision：0
2
4
Parts Number
Q'TY
Connect the LCD harness in the M/B connection port,
NA
NA
and trim the harness as per the figure.
Check the appearance of radio transmission wire and
22-600153-00
place the smaller panel on the Upper Cover, and then
1
lock the screw to fix the smaller panel as per the figure.
22-600154-00
Trim the radio transmission wire and push the lower
radio transmission wire in the lower positio before the
LCD harness, and then arrange excessive wires to the
1
41-721520-03
upper left corner.
Connect the LCD radio transmission wire to the
corresponding connection port of the radio transmission
smaller panel. Connect the wires of same color, with
gray wire pressing the radio transmission wire at the
NA
NA
upper left corner, while pushing the black wires in the
lower gap. If the Bluetooth function is provided, connect
the Bluetooth wire to the connection port at the upper
right corner of smaller panel as per the figure. Push the
wires in the lower gap.
PAGE：09
33
Manufacturing Section: P E
Date： 2005.04.18
Radio transmission connection
port when the Bluetooth
function is provided.
Operation Description
Important Note
Do not let the LCD harness lift
as to exceed the plane on the
upper screw BOSS pole.
Do not let the wire connection
port loosen or lift, and short
connection of head is not
1
Jig / Fixture
NA
NA
NA
Manual
Screwdriver/Torque: 0.5±
NA
0.2Kgf-cm
NA
allowed.
Advertisement
