Lan Ip Configuration Example - Dell NSA E8500 Getting Started Manual

LAN IP Configuration Example

The Dell SonicWALL NSA E8500 is assigned the default LAN IP
of 192.168.168.168. The following example provides steps for
changing the default IP address to 192.168.168.10.
1. Press Right to exit screen-saver mode if not at the root
menu.
2. Press Down to select the Configuration entry.
3. Press Right to enter Configuration Mode.
4. Input PIN (76642 by default; SONIC on a phone keypad.)
5. Press Up or Down until the cursor displays 7, press Right.
6. Continue this process until all of the numbers are entered.
7. Press Right to commit changes.
8. Press Down until X1 IP is selected (four times).
9. Press Right to configure X1 IP.
10. Edit X1 IP:
11. Press Right ten times to select the tenth digit.
12. Press UP or Down until the cursor displays 0.
13. Press Right once to select the next digit.
14. Press UP or Down until the cursor displays 1.
15. Press Right once to select the next digit.
16. Press Up or Down until the cursor displays 0.
17. Press Right to finish editing the X1 IP.
18. Press Right again to confirm changes.
LAN IP Configuration Example | 16