Advertisement
Quick Links
QSYNC Connection Guide
Setting Up Your New Q-Sync:
In order to use the Q-Sync you must have a DVD player that has a SPDIF out. The diagrams
below show the Inputs and Outputs on these devices used and the standard connections for
using Q-Sync. Refer to the Quick Guide for more instructions on playing the DVD on the
Q-Sync.
To SPDIF IN of Q-SYNC
To Television
MIDI out to the MIDI In on Petine
Advertisement
Summary of Contents for QRS Q-Sync
- Page 1 QSYNC Connection Guide Setting Up Your New Q-Sync: In order to use the Q-Sync you must have a DVD player that has a SPDIF out. The diagrams below show the Inputs and Outputs on these devices used and the standard connections for using Q-Sync.
- Page 2 Please read the following pages in this guide to become familiar with the Q-Sync power center units. There are a few things you need to know about DVD's and the Patented QRS Q-Sync technology in order to provide a successful demonstration of this cutting edge development.
- Page 3 QRS Q-Sync power center user guide Page 2 Spdif IN AMI OUT Power MIDI OUT 5 volt, AC wall adaptor MIDI Output to Pianomation Connect to Spdif Output of DVD player (May also be labled Digital or Coaxial on the DVD players rear panel.)
- Page 4 4 - Place the desired DVD disc into the DVD player and navigate to the play menu. 5 - Using the DATA Dial on Q-Sync (Fig A-2), navigate to the DVD movie title that matches the DVD disc you chose. Press the data dial to enter the selection. Song titles will show up in the LCD display at location shown in Fig A-1.
-
Page 5: Setup Details
Page 4 SETUP DETAILS, QRS dealer power centers are intended to be setup with QRS supplied equipment to help minimize problems related to unfamiliar A/V components. The following description refers the Sony model CD/DVD Player DVP-NC85H and Sony home theater system HT-DDW700. - Page 6 QRS Q-Sync power center user guide Page 5 Press Direction arrow on the DVD remote, Scroll to and select QUICK Press DOWN ARROW on the DVD remote Scroll to and select ENGLISH...
- Page 7 Scroll to and select YES DIGITAL OUTPUT Press the ENTER button on the DVD remote and then press DISPLAY to return to the DVD disc menu. The DVD Player audio is now set up to work with Q-Sync. Proceed to page 7 for DVD menu setup.
- Page 8 Press enter to set DTS off Press the ENTER button on the DVD remote and then press DISPLAY to return to the DVD disc menu. The DVD Player audio is now set up to work with Q-Sync. Proceed to page 8 for DVD menu setup.
- Page 9 DVD disc audio options. As mentioned before, we have attempted to take care of this set in the firmware inside the Q-Sync hardware but from time to time you may need to set these parameters. Once the DVD has been inserted into the DVD player it will automatically take you to a main menu window as shown here.
- Page 11 If you select a chapter during playback and it does not pick up the song title in Q-Sync, you can use rewind to take you to the end of the previous chapter and then press play.